Daily Papers

Weight-only post-training quantization is the cheapest way to shrink a retrieval embedder, and the received advice for applying it -- protect the embedding table, allocate bits by module sensitivity, prefer a ranking-aware objective over weight reconstruction -- was carried into LLM quantization largely intact. We test that advice on retrieval embedders directly, quantizing five checkpoints from four architecture families across a grid of bit widths and group sizes, and isolating the embedding, attention and feed-forward blocks at each width. Every heuristic fails to transfer as stated. The embedding table never emerges as the dominant isolated protection priority in any family, despite being the largest tensor in several of them. Module sensitivity does not survive as a transferable ordering: at INT4/g16 the spread between modules is too small to allocate against, at INT3 the ordering becomes family-dependent and joint damage stops being the sum of its parts, and at INT2 comparable reconstruction error accompanies retention ranging from 1.3 to 65.9 percent of full precision. A cheap reconstruction proxy is useful for screening uniform bit widths but substantially less reliable for choosing which tensors to protect; its apparent strength across the whole grid is a range-extension artifact. A distilled 109M student at INT3 holds 78.04 NDCG@10 in 68.4 MB and dominates the extreme-PTQ arm of its own 0.6B teacher, 297.9 MB at 64.46, on both size and quality -- but only inside the task it was distilled for. Sizes are byte counts of files that exist rather than arithmetic estimates, and the measurement repository carries the byte provenance for every one of them.

Mixed-precision post-training quantization needs a per-module sensitivity signal; for a text embedder the obvious one -- the retrieval quality a module costs when quantized -- needs relevance labels that deployments rarely have. We measure a label-free substitute: quantization-induced representation drift, obtained by quantizing one module, re-encoding the corpus, and recording how far the output embeddings moved from their full-precision positions. What is specific is the observable: the deployed output representation a dense retriever ranks with. Across five development embedders, configuration-level drift orders sampled mixed-precision plans against held-out retrieval quality at a macro Spearman of 0.911, the sensitivity transports across calibration corpora and retrieval domains in the usable regime, module drifts compose rank-consistently but not numerically, and relevance-derived sensitivity adds no consistent value. The method is one additive allocation under a hard packed-byte budget, with no labels and no search. On three embedders held untouched until method, baselines and hypotheses were frozen and sealed, the pre-registered directional hypothesis against the prior LieQ criterion holds (3/3 at the main budget, no collapse) and drift scores above a two-sided LieQ steelman in 2/3; but at the main budget drift is numerically lower than same-budget uniform precision on all three (-0.99, -0.85, -1.01 points), having reduced module and whole-model drift as designed. Output drift is thus a robust coarse sensitivity signal, not a universally optimal allocation objective: it avoids the catastrophic failures of the transferred signed-geometry adaptation and can remain usable at stressed budgets where uniform collapses, but fine-grained redistribution around a strong uniform operating point remains unresolved.

Large-scale Internet of Things (IoT) applications, such as asset tracking and remote sensing, demand multi-year battery lifetimes to minimize maintenance and operational costs. Traditional wireless protocols often employ duty cycling, introducing a tradeoff between latency and idle consumption - both unsuitable for event-driven and ultra-low power systems. A promising approach to address these issues is the integration of always-on wake-up radios (WuRs). They provide asynchronous, ultra-low power communication to overcome these constraints. This paper presents WakeMod, an open-source wake-up transceiver module for the 868MHz ISM band. Designed for easy integration and ultra-low power consumption, it leverages the -75dBm sensitive FH101RF WuR. WakeMod achieves a low idle power consumption of 6.9uW while maintaining responsiveness with a sensitivity of -72.6dBm. Reception of a wake-up call is possible from up to 130m of distance with a -2.1dBi antenna, consuming 17.7uJ with a latency below 54.3ms. WakeMod's capabilities have further been demonstrated in an e-ink price tag application, achieving 7.17uW idle consumption and enabling an estimated 8-year battery life with daily updates on a standard CR2032 coin cell. WakeMod offers a practical solution for energy-constrained, long-term IoT deployments, requiring low-latency, and on-demand communication.

Change detection in remote sensing imagery is a critical technique for Earth observation, primarily focusing on pixel-level segmentation of change regions between bi-temporal images. The essence of pixel-level change detection lies in determining whether corresponding pixels in bi-temporal images have changed. In deep learning, the spatial and channel dimensions of feature maps represent different information from the original images. In this study, we found that in change detection tasks, difference information can be computed not only from the spatial dimension of bi-temporal features but also from the channel dimension. Therefore, we designed the Channel-Spatial Difference Weighting (CSDW) module as an aggregation-distribution mechanism for bi-temporal features in change detection. This module enhances the sensitivity of the change detection model to difference features. Additionally, bi-temporal images share the same geographic location and exhibit strong inter-image correlations. To construct the correlation between bi-temporal images, we designed a decoding structure based on the Layer-Exchange (LE) method to enhance the interaction of bi-temporal features. Comprehensive experiments on the CLCD, PX-CLCD, LEVIR-CD, and S2Looking datasets demonstrate that the proposed LENet model significantly improves change detection performance. The code and pre-trained models will be available at: https://github.com/dyzy41/lenet.

A new type of cooperativity termed temporal cooperativity [Biophys. Chem. 105 585-593 (2003), Annu. Rev. Phys. Chem. 58 113-142 (2007)], emerges in the signal transduction module of phosphorylation-dephosphorylation cycle (PdPC). It utilizes multiple kinetic cycles in time, in contrast to allosteric cooperativity that utilizes multiple subunits in a protein. In the present paper, we thoroughly investigate both the deterministic (microscopic) and stochastic (mesoscopic) models, and focus on the identification of the source of temporal cooperativity via comparing with allosteric cooperativity. A thermodynamic analysis confirms again the claim that the chemical equilibrium state exists if and only if the phosphorylation potential triangle G=0, in which case the amplification of sensitivity is completely abolished. Then we provide comprehensive theoretical and numerical analysis with the first-order and zero-order assumptions in phosphorylation-dephosphorylation cycle respectively. Furthermore, it is interestingly found that the underlying mathematics of temporal cooperativity and allosteric cooperativity are equivalent, and both of them can be expressed by "dissociation constants", which also characterizes the essential differences between the simple and ultrasensitive PdPC switches. Nevertheless, the degree of allosteric cooperativity is restricted by the total number of sites in a single enzyme molecule which can not be freely regulated, while temporal cooperativity is only restricted by the total number of molecules of the target protein which can be regulated in a wide range and gives rise to the ultrasensitivity phenomenon.

Low-rank adaptation (LoRA) is a widely used parameter-efficient fine-tuning method that places trainable low-rank adapters into frozen pre-trained models. Recent studies show that using fewer LoRA adapters may still maintain or even improve performance, but existing methods still distribute adapters broadly, leaving where to place a limited number of adapters to maximize performance largely open. To investigate this, we introduce PAGE (Projected Adapter Gradient Energy), a gradient-based sensitivity probe that estimates the initial trainable gradient energy available to each candidate LoRA adapter. Surprisingly, we find that PAGE is highly concentrated on a single shallow FFN down-projection across two model families and four downstream tasks. We term this module the dominant adaptation module and show that its layer index is architecture-dependent but task-stable. Motivated by this finding, we propose DomLoRA, a placement method that places a single adapter at the dominant adaptation module. With only 0.7\% of vanilla LoRA's trainable parameters, DomLoRA outperforms it on average across downstream tasks, including instruction following, mathematical reasoning, coding, and multi-turn conversation. This method also matches or improves other LoRA variants and reduces training time by up to 2.74times compared with broad placement, supporting the dominant adaptation module perspective as a practical placement guideline.

Autonomous driving requires accurate scene understanding, including road geometry, traffic agents, and their semantic relationships. In online HD map generation scenarios, raster-based representations are well-suited to vision models but lack geometric precision, while graph-based representations retain structural detail but become unstable without precise maps. To harness the complementary strengths of both, we propose DiffSemanticFusion -- a fusion framework for multimodal trajectory prediction and planning. Our approach reasons over a semantic raster-fused BEV space, enhanced by a map diffusion module that improves both the stability and expressiveness of online HD map representations. We validate our framework on two downstream tasks: trajectory prediction and planning-oriented end-to-end autonomous driving. Experiments on real-world autonomous driving benchmarks, nuScenes and NAVSIM, demonstrate improved performance over several state-of-the-art methods. For the prediction task on nuScenes, we integrate DiffSemanticFusion with the online HD map informed QCNet, achieving a 5.1\% performance improvement. For end-to-end autonomous driving in NAVSIM, DiffSemanticFusion achieves state-of-the-art results, with a 15\% performance gain in NavHard scenarios. In addition, extensive ablation and sensitivity studies show that our map diffusion module can be seamlessly integrated into other vector-based approaches to enhance performance. All artifacts are available at https://github.com/SunZhigang7/DiffSemanticFusion.

Precise segmentation of brain tumors, particularly contrast-enhancing regions visible in post-contrast MRI (areas highlighted by contrast agent injection), is crucial for accurate clinical diagnosis and treatment planning but remains challenging. However, current methods exhibit notable performance degradation in segmenting these enhancing brain tumor areas, largely due to insufficient consideration of MRI-specific tumor features such as complex textures and directional variations. To address this, we propose the Harmonized Frequency Fusion Network (HFF-Net), which rethinks brain tumor segmentation from a frequency-domain perspective. To comprehensively characterize tumor regions, we develop a Frequency Domain Decomposition (FDD) module that separates MRI images into low-frequency components, capturing smooth tumor contours and high-frequency components, highlighting detailed textures and directional edges. To further enhance sensitivity to tumor boundaries, we introduce an Adaptive Laplacian Convolution (ALC) module that adaptively emphasizes critical high-frequency details using dynamically updated convolution kernels. To effectively fuse tumor features across multiple scales, we design a Frequency Domain Cross-Attention (FDCA) integrating semantic, positional, and slice-specific information. We further validate and interpret frequency-domain improvements through visualization, theoretical reasoning, and experimental analyses. Extensive experiments on four public datasets demonstrate that HFF-Net achieves an average relative improvement of 4.48\% (ranging from 2.39\% to 7.72\%) in the mean Dice scores across the three major subregions, and an average relative improvement of 7.33% (ranging from 5.96% to 8.64%) in the segmentation of contrast-enhancing tumor regions, while maintaining favorable computational efficiency and clinical applicability. Code: https://github.com/VinyehShaw/HFF.

All-in-one image restoration, which aims to address diverse degradations within a unified framework, is critical for practical applications. However, existing methods rely on predicting and integrating degradation conditions, which can misactivate degradation-specific features in complex scenarios, limiting their restoration performance. To address this issue, we propose a novel all-in-one image restoration framework guided by Histograms of Oriented Gradients (HOG), named HOGformer. By leveraging the degradation-discriminative capability of HOG descriptors, HOGformer employs a dynamic self-attention mechanism that adaptively attends to long-range spatial dependencies based on degradation-aware HOG cues. To enhance the degradation sensitivity of attention inputs, we design a HOG-guided local dynamic-range convolution module that captures long-range degradation similarities while maintaining awareness of global structural information. Furthermore, we propose a dynamic interaction feed-forward module, efficiently increasing the model capacity to adapt to different degradations through channel-spatial interactions. Extensive experiments across diverse benchmarks, including adverse weather and natural degradations, demonstrate that HOGformer achieves state-of-the-art performance and generalizes effectively to complex real-world degradations. Code is available at https://github.com/Fire-friend/HOGformer.

Gastrointestinal (GI) diseases represent a clinically significant burden, necessitating precise diagnostic approaches to optimize patient outcomes. Conventional histopathological diagnosis suffers from limited reproducibility and diagnostic variability. To overcome these limitations, we develop Digepath, a specialized foundation model for GI pathology. Our framework introduces a dual-phase iterative optimization strategy combining pretraining with fine-screening, specifically designed to address the detection of sparsely distributed lesion areas in whole-slide images. Digepath is pretrained on over 353 million multi-scale images from 210,043 H&E-stained slides of GI diseases. It attains state-of-the-art performance on 33 out of 34 tasks related to GI pathology, including pathological diagnosis, protein expression status prediction, gene mutation prediction, and prognosis evaluation. We further translate the intelligent screening module for early GI cancer and achieve near-perfect 99.70% sensitivity across nine independent medical institutions. This work not only advances AI-driven precision pathology for GI diseases but also bridge critical gaps in histopathological practice.

Mixture-of-Experts (MoE) LLMs scale model capacity efficiently through sparse activation, but their large expert parameter footprint, routing imbalance, and long-context KV-cache growth make deployment difficult on commodity hardware. Practical deployment often requires stacking multiple compression techniques: expert pruning removes redundant experts, weight quantization lowers model memory footprint, and KV-cache compression reduces long-context memory pressure. However, these techniques are typically evaluated in isolation, leaving open how they interact when applied together in realistic deployment pipelines. In this work, we present MoEXBench, a systematic benchmark for evaluating composable MoE compression as an end-to-end deployment workflow. MoEXBench studies 10 MoE models ranging from 30B to 235B total parameters across standard-attention, hybrid linear-attention, and sliding window attention architectures. It evaluates 20%-50% expert pruning rates, 1 to 16 bit weight-quantization schemes, and multiple KV-cache precision settings, applied both individually and in combination. MoEXBench introduces an eight-module evaluation suite that jointly measures composable-compression quality, workload and architecture robustness, pruning/quantization/KV cache sensitivity, and deployment efficiency on commodity hardware. Our results reveal non-trivial interactions among compression methods: composable compression cannot be predicted from standalone techniques, compression rate alone does not reliably predict quality loss or runtime gain, expert pruning is the dominant degradation source, and average quality can hide workload and architecture-specific failures. By releasing normalized module scores, compressed artifacts, and reproducible scripts, MoEXBench enables practical accuracy-memory-latency comparison across MoE families and hardware backends.

In the realm of subject-driven text-to-image (T2I) generative models, recent developments like DreamBooth and BLIP-Diffusion have led to impressive results yet encounter limitations due to their intensive fine-tuning demands and substantial parameter requirements. While the low-rank adaptation (LoRA) module within DreamBooth offers a reduction in trainable parameters, it introduces a pronounced sensitivity to hyperparameters, leading to a compromise between parameter efficiency and the quality of T2I personalized image synthesis. Addressing these constraints, we introduce \textit{DiffuseKronA}, a novel Kronecker product-based adaptation module that not only significantly reduces the parameter count by 35\% and 99.947\% compared to LoRA-DreamBooth and the original DreamBooth, respectively, but also enhances the quality of image synthesis. Crucially, DiffuseKronA mitigates the issue of hyperparameter sensitivity, delivering consistent high-quality generations across a wide range of hyperparameters, thereby diminishing the necessity for extensive fine-tuning. Furthermore, a more controllable decomposition makes DiffuseKronA more interpretable and even can achieve up to a 50\% reduction with results comparable to LoRA-Dreambooth. Evaluated against diverse and complex input images and text prompts, DiffuseKronA consistently outperforms existing models, producing diverse images of higher quality with improved fidelity and a more accurate color distribution of objects, all the while upholding exceptional parameter efficiency, thus presenting a substantial advancement in the field of T2I generative modeling. Our project page, consisting of links to the code, and pre-trained checkpoints, is available at https://diffusekrona.github.io/{https://diffusekrona.github.io/}.

With the rapid advancement of real-time deepfake generation techniques, forged content is becoming increasingly realistic and widespread across applications like video conferencing and social media. Although state-of-the-art detectors achieve high accuracy on standard benchmarks, their heavy computational cost hinders real-time deployment in practical applications. To address this, we propose the Spatial-Frequency Aware Multi-Scale Fusion Network (SFMFNet), a lightweight yet effective architecture for real-time deepfake detection. We design a spatial-frequency hybrid aware module that jointly leverages spatial textures and frequency artifacts through a gated mechanism, enhancing sensitivity to subtle manipulations. A token-selective cross attention mechanism enables efficient multi-level feature interaction, while a residual-enhanced blur pooling structure helps retain key semantic cues during downsampling. Experiments on several benchmark datasets show that SFMFNet achieves a favorable balance between accuracy and efficiency, with strong generalization and practical value for real-time applications.

Large Language Models (LLMs) inherently encode a wealth of knowledge within their parameters through pre-training on extensive corpora. While prior research has delved into operations on these parameters to manipulate the underlying implicit knowledge (encompassing detection, editing, and merging), there remains an ambiguous understanding regarding their transferability across models with varying scales. In this paper, we seek to empirically investigate knowledge transfer from larger to smaller models through a parametric perspective. To achieve this, we employ sensitivity-based techniques to extract and align knowledge-specific parameters between different LLMs. Moreover, the LoRA module is used as the intermediary mechanism for injecting the extracted knowledge into smaller models. Evaluations across four benchmarks validate the efficacy of our proposed method. Our findings highlight the critical factors contributing to the process of parametric knowledge transfer, underscoring the transferability of model parameters across LLMs of different scales. We release code and data at https://github.com/maszhongming/ParaKnowTransfer.

This paper proposes a cold start recommendation model that integrates contrastive learning, aiming to solve the problem of performance degradation of recommendation systems in cold start scenarios due to the scarcity of user and item interaction data. The model dynamically adjusts the weights of key features through an adaptive feature selection module and effectively integrates user attributes, item meta-information, and contextual features by combining a multimodal feature fusion mechanism, thereby improving recommendation performance. In addition, the model introduces a contrastive learning mechanism to enhance the robustness and generalization ability of feature representation by constructing positive and negative sample pairs. Experiments are conducted on the MovieLens-1M dataset. The results show that the proposed model significantly outperforms mainstream recommendation methods such as Matrix Factorization, LightGBM, DeepFM, and AutoRec in terms of HR, NDCG, MRR, and Recall, especially in cold start scenarios. Ablation experiments further verify the key role of each module in improving model performance, and the learning rate sensitivity analysis shows that a moderate learning rate is crucial to the optimization effect of the model. This study not only provides a new solution to the cold start problem but also provides an important reference for the application of contrastive learning in recommendation systems. In the future, this model is expected to play a role in a wider range of scenarios, such as real-time recommendation and cross-domain recommendation.

In-context Learning enables training-free adaptation via demonstrations but remains highly sensitive to example selection and formatting. In unified multimodal models spanning understanding and generation, this sensitivity is exacerbated by cross-modal interference and varying cognitive demands. Consequently, In-context Learning efficacy is often non-monotonic and highly task-dependent. To diagnose these behaviors, we introduce a six-level capability-oriented taxonomy that categorizes the functional role of demonstrations from basic perception to high-order discernment. Guided by this cognitive framework, we construct UniICL-760K, a large-scale corpus featuring curated 8-shot In-context Learning episodes across 15 subtasks, alongside UniICL-Bench for rigorous, controlled evaluation. As an architectural intervention to stabilize few-shot adaptation, we propose the Context-Adaptive Prototype Modulator, a lightweight, plug-and-play module. Evaluations on UniICL-Bench show that our approach yields highly competitive unified results, outperforming larger-parameter multimodal large language model baselines on most understanding In-context Learning tasks. Data and code will be available soon at https://github.com/xuyicheng-zju/UniICL.

Despite the growing interest in open-vocabulary object detection in recent years, most existing methods rely heavily on manually curated fine-grained training datasets as well as resource-intensive layer-wise cross-modal feature extraction. In this paper, we propose HDINO, a concise yet efficient open-vocabulary object detector that eliminates the dependence on these components. Specifically, we propose a two-stage training strategy built upon the transformer-based DINO model. In the first stage, noisy samples are treated as additional positive object instances to construct a One-to-Many Semantic Alignment Mechanism(O2M) between the visual and textual modalities, thereby facilitating semantic alignment. A Difficulty Weighted Classification Loss (DWCL) is also designed based on initial detection difficulty to mine hard examples and further improve model performance. In the second stage, a lightweight feature fusion module is applied to the aligned representations to enhance sensitivity to linguistic semantics. Under the Swin Transformer-T setting, HDINO-T achieves 49.2 mAP on COCO using 2.2M training images from two publicly available detection datasets, without any manual data curation and the use of grounding data, surpassing Grounding DINO-T and T-Rex2 by 0.8 mAP and 2.8 mAP, respectively, which are trained on 5.4M and 6.5M images. After fine-tuning on COCO, HDINO-T and HDINO-L further achieve 56.4 mAP and 59.2 mAP, highlighting the effectiveness and scalability of our approach. Code and models are available at https://github.com/HaoZ416/HDINO.

Time-series anomaly detection (TSAD) requires identifying both immediate Point Anomalies and long-range Context Anomalies. However, existing foundation models face a fundamental trade-off: 1D temporal models provide fine-grained pointwise localization but lack a global contextual perspective, while 2D vision-based models capture global patterns but suffer from information bottlenecks due to a lack of temporal alignment and coarse-grained pointwise detection. To resolve this dilemma, we propose VETime, the first TSAD framework that unifies temporal and visual modalities through fine-grained visual-temporal alignment and dynamic fusion. VETime introduces a Reversible Image Conversion and a Patch-Level Temporal Alignment module to establish a shared visual-temporal timeline, preserving discriminative details while maintaining temporal sensitivity. Furthermore, we design an Anomaly Window Contrastive Learning mechanism and a Task-Adaptive Multi-Modal Fusion to adaptively integrate the complementary perceptual strengths of both modalities. Extensive experiments demonstrate that VETime significantly outperforms state-of-the-art models in zero-shot scenarios, achieving superior localization precision with lower computational overhead than current vision-based approaches. Code available at: https://github.com/yyyangcoder/VETime .

Face anti-spoofing techniques based on domain generalization have recently been studied widely. Adversarial learning and meta-learning techniques have been adopted to learn domain-invariant representations. However, prior approaches often consider the dataset gap as the primary factor behind domain shifts. This perspective is not fine-grained enough to reflect the intrinsic gap among the data accurately. In our work, we redefine domains based on identities rather than datasets, aiming to disentangle liveness and identity attributes. We emphasize ignoring the adverse effect of identity shift, focusing on learning identity-invariant liveness representations through orthogonalizing liveness and identity features. To cope with style shifts, we propose Style Cross module to expand the stylistic diversity and Channel-wise Style Attention module to weaken the sensitivity to style shifts, aiming to learn robust liveness representations. Furthermore, acknowledging the asymmetry between live and spoof samples, we introduce a novel contrastive loss, Asymmetric Augmented Instance Contrast. Extensive experiments on four public datasets demonstrate that our method achieves state-of-the-art performance under cross-dataset and limited source dataset scenarios. Additionally, our method has good scalability when expanding diversity of identities. The codes will be released soon.

Large Language Models (LLMs) have achieved impressive results on static code-generation benchmarks, but real-world software development unfolds as a continuous stream of evolving issues, fixes, and feature requests. We introduce SWE-Bench-CL, a novel continual learning benchmark built on the human-verified SWE-Bench Verified dataset introduced by OpenAI and Princeton-NLP in 2024. By organizing GitHub issues into chronologically ordered sequences that reflect natural repository evolution, SWE-Bench-CL enables direct evaluation of an agent's ability to accumulate experience, transfer knowledge across tasks, and resist catastrophic forgetting. We complement the dataset with (i) a preliminary analysis of inter-task structural similarity and contextual sensitivity, (ii) an interactive LangGraph-based evaluation framework augmented with a FAISS-backed semantic memory module, and (iii) a suite of specialized continual learning metrics -- including average accuracy, forgetting, forward/backward transfer, tool-use efficiency, and a generalized Composite Continual Learning Score and CL-F-beta score -- to capture the stability-plasticity trade-off. We outline a rigorous experimental protocol comparing memory-enabled and memory-disabled agents across diverse Python repositories. All code and data are publicly available at https://github.com/thomasjoshi/agents-never-forget, providing the community with a reproducible platform for developing more adaptive and robust AI agents in software engineering.

The rapid growth of high-resolution, meticulously crafted AI-generated images poses a significant challenge to existing detection methods, which are often trained and evaluated on low-resolution, automatically generated datasets that do not align with the complexities of high-resolution scenarios. A common practice is to resize or center-crop high-resolution images to fit standard network inputs. However, without full coverage of all pixels, such strategies risk either obscuring subtle, high-frequency artifacts or discarding information from uncovered regions, leading to input information loss. In this paper, we introduce the High-Resolution Detail-Aggregation Network (HiDA-Net), a novel framework that ensures no pixel is left behind. We use the Feature Aggregation Module (FAM), which fuses features from multiple full-resolution local tiles with a down-sampled global view of the image. These local features are aggregated and fused with global representations for final prediction, ensuring that native-resolution details are preserved and utilized for detection. To enhance robustness against challenges such as localized AI manipulations and compression, we introduce Token-wise Forgery Localization (TFL) module for fine-grained spatial sensitivity and JPEG Quality Factor Estimation (QFE) module to disentangle generative artifacts from compression noise explicitly. Furthermore, to facilitate future research, we introduce HiRes-50K, a new challenging benchmark consisting of 50,568 images with up to 64 megapixels. Extensive experiments show that HiDA-Net achieves state-of-the-art, increasing accuracy by over 13% on the challenging Chameleon dataset and 10% on our HiRes-50K.

Dashcam videos collected by autonomous or assisted-driving systems are increasingly shared for safety auditing and model improvement. Even when explicit GPS metadata are removed, an attacker can still infer the recording location by matching background visual cues (e.g., buildings and road layouts) against large-scale street-view imagery. This paper studies location-privacy leakage under a background-based retrieval attacker, and proposes PPEDCRF, a privacy-preserving enhanced dynamic conditional random field framework that injects calibrated perturbations only into inferred location-sensitive background regions while preserving foreground detection utility. PPEDCRF consists of three components: (i) a dynamic CRF that enforces temporal consistency to discover and track location sensitive regions across frames, (ii) a normalized control penalty (NCP) that allocates perturbation strength according to a hierarchical sensitivity model, and (iii) a utility-preserving noise injection module that minimizes interference to object detection and segmentation. Experiments on public driving datasets demonstrate that PPEDCRF significantly reduces location-retrieval attack success (e.g., Top-k retrieval accuracy) while maintaining competitive detection performance (e.g., mAP and segmentation metrics) compared with common baselines such as global noise, white-noise masking, and feature-based anonymization. The source code is in https://github.com/mabo1215/PPEDCRF.git

Federated multimodal graph foundation models (GFMs) aim to adapt pretrained multimodal models to decentralized graph data, where each client owns a private multimodal graph and cannot share raw information. These models typically combine a multimodal Encoder that extracts semantic evidence from heterogeneous modalities and a graph neural network (GNN) that performs relational reasoning over graph structures. However, existing federated GFM adaptation methods mainly update graph-side modules while keeping the multimodal Encoder frozen, limiting adaptation to how information is propagated while fixing what information is extracted. Through empirical studies, we reveal that Encoder and GNN adaptations are not independent: Encoder adaptation is affected by graph relations, while cross-client module swapping reveals substantial pairing sensitivity between separately parameterized Encoder and GNN updates. Motivated by this observation, we propose FedCORE, a federated adaptation framework that represents Encoder and GNN updates through a shared low-dimensional latent state. FedCORE jointly optimizes this core from multimodal and structural signals and performs federated evolution directly in the shared state space, preserving compatibility between perception and reasoning adaptations. Extensive experiments demonstrate that FedCORE reduces the Encoder--GNN pairing gap from 30.6 to 5.9, corresponding to an 80.7% reduction over independent joint adaptation.

In industrial anomaly detection (IAD), accurately identifying defects amidst diverse anomalies and under varying imaging conditions remains a significant challenge. Traditional approaches often struggle with high false-positive rates, frequently misclassifying normal shadows and surface deformations as defects, an issue that becomes particularly pronounced in products with complex and intricate surface features. To address these challenges, we introduce PA-CLIP, a zero-shot anomaly detection method that reduces background noise and enhances defect detection through a pseudo-anomaly-based framework. The proposed method integrates a multiscale feature aggregation strategy for capturing detailed global and local information, two memory banks for distinguishing background information, including normal patterns and pseudo-anomalies, from true anomaly features, and a decision-making module designed to minimize false positives caused by environmental variations while maintaining high defect sensitivity. Demonstrated on the MVTec AD and VisA datasets, PA-CLIP outperforms existing zero-shot methods, providing a robust solution for industrial defect detection.

Large Language Models (LLMs) changed the way we design and interact with software systems. Their ability to process and extract information from text has drastically improved productivity in a number of routine tasks. Developers that want to include these models in their software stack, however, face a dreadful challenge: debugging LLMs' inconsistent behavior across minor variations of the prompt. We therefore introduce two metrics for classification tasks, namely sensitivity and consistency, which are complementary to task performance. First, sensitivity measures changes of predictions across rephrasings of the prompt, and does not require access to ground truth labels. Instead, consistency measures how predictions vary across rephrasings for elements of the same class. We perform an empirical comparison of these metrics on text classification tasks, using them as guideline for understanding failure modes of the LLM. Our hope is that sensitivity and consistency will be helpful to guide prompt engineering and obtain LLMs that balance robustness with performance.

Despite their remarkable capabilities, Large Language Models (LLMs) are found to be surprisingly sensitive to minor variations in prompts, often generating significantly divergent outputs in response to minor variations in the prompts, such as spelling errors, alteration of wording or the prompt template. However, while assessing the quality of an LLM, the focus often tends to be solely on its performance on downstream tasks, while very little to no attention is paid to prompt sensitivity. To fill this gap, we propose POSIX - a novel PrOmpt Sensitivity IndeX as a reliable measure of prompt sensitivity, thereby offering a more comprehensive evaluation of LLM performance. The key idea behind POSIX is to capture the relative change in loglikelihood of a given response upon replacing the corresponding prompt with a different intent-preserving prompt. We provide thorough empirical evidence demonstrating the efficacy of POSIX in capturing prompt sensitivity and subsequently use it to measure and thereby compare prompt sensitivity of various open-source LLMs. We find that merely increasing the parameter count or instruction tuning does not necessarily reduce prompt sensitivity whereas adding some few-shot exemplars, even just one, almost always leads to significant decrease in prompt sensitivity. We also find that alterations to prompt template lead to the highest sensitivity in the case of MCQ type tasks, whereas paraphrasing results in the highest sensitivity in open-ended generation tasks. The code for reproducing our results is open-sourced at https://github.com/kowndinya-renduchintala/POSIX.

Large language models (LLMs) now write code in settings where misreading a single word can break safety or cost money, yet we still expect them to overlook stray typos. To probe where useful robustness ends and harmful insensitivity begins, we compile 50 LeetCode problems and craft three minimal prompt perturbations that should vary in importance: (i) progressive underspecification deleting 10 % of words per step; (ii) lexical flip swapping a pivotal quantifier ("max" to "min"); and (iii) jargon inflation replacing a common noun with an obscure technical synonym. Six frontier models, including three "reasoning-tuned" versions, solve each mutated prompt, and their Python outputs are checked against the original test suites to reveal whether they reused the baseline solution or adapted. Among 11 853 generations we observe a sharp double asymmetry. Models remain correct in 85 % of cases even after 90 % of the prompt is missing, showing over-robustness to underspecification, yet only 54 % react to a single quantifier flip that reverses the task, with reasoning-tuned variants even less sensitive than their bases. Jargon edits lie in between, passing through 56 %. Current LLMs thus blur the line between harmless noise and meaning - changing edits, often treating both as ignorable. Masking salient anchors such as function names can force re - evaluation. We advocate evaluation and training protocols that reward differential sensitivity: stay steady under benign noise but adapt - or refuse - when semantics truly change.

Removing an input-scaling module changes both a classifier and the perturbations reaching its encoder. A robustness difference can therefore reflect the comparison rule as well as the module. We demonstrate this problem in a four-qubit quantum-attention detector on generated power-grid trajectories. A learned scaling module appears beneficial at a fixed physical attack budget, but matching an upper bound on perturbations at the encoder reverses the ordering. Neither comparison alone establishes a robustness benefit caused by the module. The initial test also perturbs clean examples into attacked examples while retaining their original labels; tests restricted to already attacked examples do not establish a benefit. Replacing a trained model's input scales disrupts detection. Retraining its linear classification layer restores the detection rate, but changes individual predictions, leaving the comparison descriptive rather than causal. Two further design checks explain why the input quantum Fisher information regularizer cannot train this model's query parameters, and why removing confidence bounds does not establish a larger certified radius. The evidence is limited to ten seeds, exact simulation, synthetic data, and a restricted set of attacks; classical baselines achieve better clean prediction. The practical lesson is to specify which perturbation budget is fixed, check that attacks preserve labels and interventions preserve predictions, and distinguish exploratory controls from confirmatory evidence.

As large language models (LLMs) are adopted as a fundamental component of language technologies, it is crucial to accurately characterize their performance. Because choices in prompt design can strongly influence model behavior, this design process is critical in effectively using any modern pre-trained generative language model. In this work, we focus on LLM sensitivity to a quintessential class of meaning-preserving design choices: prompt formatting. We find that several widely used open-source LLMs are extremely sensitive to subtle changes in prompt formatting in few-shot settings, with performance differences of up to 76 accuracy points when evaluated using LLaMA-2-13B. Sensitivity remains even when increasing model size, the number of few-shot examples, or performing instruction tuning. Our analysis suggests that work evaluating LLMs with prompting-based methods would benefit from reporting a range of performance across plausible prompt formats, instead of the currently-standard practice of reporting performance on a single format. We also show that format performance only weakly correlates between models, which puts into question the methodological validity of comparing models with an arbitrarily chosen, fixed prompt format. To facilitate systematic analysis we propose FormatSpread, an algorithm that rapidly evaluates a sampled set of plausible prompt formats for a given task, and reports the interval of expected performance without accessing model weights. Furthermore, we present a suite of analyses that characterize the nature of this sensitivity, including exploring the influence of particular atomic perturbations and the internal representation of particular formats.

Prompt sensitivity, referring to the phenomenon where paraphrasing (i.e., repeating something written or spoken using different words) leads to significant changes in large language model (LLM) performance, has been widely accepted as a core limitation of LLMs. In this work, we revisit this issue and ask: Is the widely reported high prompt sensitivity truly an inherent weakness of LLMs, or is it largely an artifact of evaluation processes? To answer this question, we systematically evaluate 7 LLMs (e.g., GPT and Gemini family) across 6 benchmarks, including both multiple-choice and open-ended tasks on 12 diverse prompt templates. We find that much of the prompt sensitivity stems from heuristic evaluation methods, including log-likelihood scoring and rigid answer matching, which often overlook semantically correct responses expressed through alternative phrasings, such as synonyms or paraphrases. When we adopt LLM-as-a-Judge evaluations, we observe a substantial reduction in performance variance and a consistently higher correlation in model rankings across prompts. Our findings suggest that modern LLMs are more robust to prompt templates than previously believed, and that prompt sensitivity may be more an artifact of evaluation than a flaw in the models.

Deep neural networks are susceptible to adversarial examples, posing a significant security risk in critical applications. Adversarial Training (AT) is a well-established technique to enhance adversarial robustness, but it often comes at the cost of decreased generalization ability. This paper proposes Robustness Critical Fine-Tuning (RiFT), a novel approach to enhance generalization without compromising adversarial robustness. The core idea of RiFT is to exploit the redundant capacity for robustness by fine-tuning the adversarially trained model on its non-robust-critical module. To do so, we introduce module robust criticality (MRC), a measure that evaluates the significance of a given module to model robustness under worst-case weight perturbations. Using this measure, we identify the module with the lowest MRC value as the non-robust-critical module and fine-tune its weights to obtain fine-tuned weights. Subsequently, we linearly interpolate between the adversarially trained weights and fine-tuned weights to derive the optimal fine-tuned model weights. We demonstrate the efficacy of RiFT on ResNet18, ResNet34, and WideResNet34-10 models trained on CIFAR10, CIFAR100, and Tiny-ImageNet datasets. Our experiments show that \method can significantly improve both generalization and out-of-distribution robustness by around 1.5% while maintaining or even slightly enhancing adversarial robustness. Code is available at https://github.com/microsoft/robustlearn.

Refusal rates are a poor proxy for LLM safety, i.e., a model may over-refuse benign prompts while still complying with harmful ones. We audit both failure modes across 21 open-weight LLMs on four safety benchmarks (OR-Bench, XSTest, ToxiGen, BOLD), using a composition adjustment to isolate model sensitivity from dataset toxicity confounds. We report three findings. First, models adopt fundamentally different calibration strategies: conservative ecosystems such as Llama suppress unsafe outputs at the cost of elevated over-refusals, while permissive ecosystems such as DeepSeek and Qwen preserve helpfulness but tolerate higher harmful compliance. Second, demographic protection is unequal: models over-protect prominent racial and religious groups, frequently refusing even benign prompts about them, while providing substantially weaker protection against disability-targeted attacks. Third, refusal and compliance tendencies are stable within model families across generations and scales, suggesting that post-training objectives shape safety behavior more than architecture. Our results call for joint, demographically-aware, and multi-judge safety evaluation.

Prediction models can exhibit sensitivity with respect to training data: small changes in the training data can produce models that assign conflicting predictions to individual data points during test time. In this work, we study this sensitivity in recommender systems, where users' recommendations are drastically altered by minor perturbations in other unrelated users' interactions. We introduce a measure of stability for recommender systems, called Rank List Sensitivity (RLS), which measures how rank lists generated by a given recommender system at test time change as a result of a perturbation in the training data. We develop a method, CASPER, which uses cascading effect to identify the minimal and systematical perturbation to induce higher instability in a recommender system. Experiments on four datasets show that recommender models are overly sensitive to minor perturbations introduced randomly or via CASPER - even perturbing one random interaction of one user drastically changes the recommendation lists of all users. Importantly, with CASPER perturbation, the models generate more unstable recommendations for low-accuracy users (i.e., those who receive low-quality recommendations) than high-accuracy ones.

Prompt sensitivity, which refers to how strongly the output of a large language model (LLM) depends on the exact wording of its input prompt, raises concerns among users about the LLM's stability and reliability. In this work, we consider LLMs as multivariate functions and perform a first-order Taylor expansion, thereby analyzing the relationship between meaning-preserving prompts, their gradients, and the log probabilities of the model's next token. We derive an upper bound on the difference between log probabilities using the Cauchy-Schwarz inequality. We show that LLMs do not internally cluster similar inputs like smaller neural networks do, but instead disperse them. This dispersing behavior leads to an excessively high upper bound on the difference of log probabilities between two meaning-preserving prompts, making it difficult to effectively reduce to 0. In our analysis, we also show which types of meaning-preserving prompt variants are more likely to introduce prompt sensitivity risks in LLMs. In addition, we demonstrate that the upper bound is strongly correlated with an existing prompt sensitivity metric, PromptSensiScore. Moreover, by analyzing the logit variance, we find that prompt templates typically exert a greater influence on logits than the questions themselves. Overall, our results provide a general interpretation for why current LLMs can be highly sensitive to prompts with the same meaning, offering crucial evidence for understanding the prompt sensitivity of LLMs. Code for experiments is available at https://github.com/ku-nlp/Understanding_the_Prompt_Sensitivity.

Large language models (LLMs) are widely used as zero-shot and few-shot classifiers, where task behaviour is largely controlled through prompting. A growing number of works have observed that LLMs are sensitive to prompt variations, with small changes leading to large changes in performance. However, in many cases, the investigation of sensitivity is performed using underspecified prompts that provide minimal task instructions and weakly constrain the model's output space. In this work, we argue that a significant portion of the observed prompt sensitivity can be attributed to prompt underspecification. We systematically study and compare the sensitivity of underspecified prompts and prompts that provide specific instructions. Utilising performance analysis, logit analysis, and linear probing, we find that underspecified prompts exhibit higher performance variance and lower logit values for relevant tokens, while instruction-prompts suffer less from such problems. However, linear probing analysis suggests that the effects of prompt underspecification have only a marginal impact on the internal LLM representations, instead emerging in the final layers. Overall, our findings highlight the need for more rigour when investigating and mitigating prompt sensitivity.

Recent work found that LLMs are sensitive to a wide range of arbitrary prompt dimensions, including the type of delimiters, answer enumerators, instruction wording, and more. This throws into question popular single-prompt evaluation practices. We present DOVE (Dataset Of Variation Evaluation) a large-scale dataset containing prompt perturbations of various evaluation benchmarks. In contrast to previous work, we examine LLM sensitivity from an holistic perspective, and assess the joint effects of perturbations along various dimensions, resulting in thousands of perturbations per instance. We evaluate several model families against DOVE, leading to several findings, including efficient methods for choosing well-performing prompts, observing that few-shot examples reduce sensitivity, and identifying instances which are inherently hard across all perturbations. DOVE consists of more than 250M prompt perturbations and model outputs, which we make publicly available to spur a community-wide effort toward meaningful, robust, and efficient evaluation. Browse the data, contribute, and more: https://slab-nlp.github.io/DOVE/

We examine how closely pretrained LeWorldModel (LeWM) reproduces the effects of small action changes. Using matched simulator and model responses, we measure action sensitivity with Gram matrices at three perturbation scales. Across nearly a thousand states from Reacher and OGBench Cube, the most sensitive action directions differ by median angles of about 36^circ and 42^circ, respectively, at the smallest scale. Increasing the perturbation tenfold reduces median normalized Gram discrepancy by roughly 70\% on Reacher and 47\% on Cube. Geometry measured in pixels and embeddings varies more across scales than the chosen physical-state geometry. On held-out directions, environment Grams achieve median embedding response errors of 17\% and 28\%, compared with 26\% and 38\% for an isotropic reference with the same trace. LeWM's errors are higher at this scale. These findings support scale-specific evaluation of action sensitivity; its effect on control remains an open question.

Existing methods to recover model accuracy on analog-digital hardware in the presence of quantization and analog noise include noise-injection training. However, it can be slow in practice, incurring high computational costs, even when starting from pretrained models. We introduce the Sensitivity-Aware Finetuning (SAFT) approach that identifies noise sensitive layers in a model, and uses the information to freeze specific layers for noise-injection training. Our results show that SAFT achieves comparable accuracy to noise-injection training and is 2x to 8x faster.

Instruction embedding models have become common among state-of-the-art models, however are evaluated using a single prompt per task. The single-point evaluation ignores a main problem of the instruction-based approach namely: sensitivity to the phrasing of the instruction. We present an empirical study of prompt sensitivity across 6 embedding models, 11 datasets, and 15 task-specific prompts per dataset, a total of 990. We show that reported scores misrepresent the distribution of scores over plausible prompts. The default prompt can both systematically understate or overstate performance. Furthermore, we show that the leaderboard ranking is not robust to prompt selection: by choosing prompts favorably, any model in our study can be promoted to first place. Our findings suggest that single-prompt evaluation is insufficient for instruction-tuned embedding models and that benchmarks should incorporate prompt robustness, either by evaluating over multiple prompts or by reporting sensitivity alongside point estimates.

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

The vulnerability of deep neural networks to adversarial samples has been a major impediment to their broad applications, despite their success in various fields. Recently, some works suggested that adversarially-trained models emphasize the importance of low-frequency information to achieve higher robustness. While several attempts have been made to leverage this frequency characteristic, they have all faced the issue that applying low-pass filters directly to input images leads to irreversible loss of discriminative information and poor generalizability to datasets with distinct frequency features. This paper presents a plug-and-play module called the Frequency Preference Control Module that adaptively reconfigures the low- and high-frequency components of intermediate feature representations, providing better utilization of frequency in robust learning. Empirical studies show that our proposed module can be easily incorporated into any adversarial training framework, further improving model robustness across different architectures and datasets. Additionally, experiments were conducted to examine how the frequency bias of robust models impacts the adversarial training process and its final robustness, revealing interesting insights.

Quantization addresses the high resource demand for large language models (LLMs) by alleviating memory pressure and bandwidth congestion and providing significantly scaled compute power with a tolerable impact on accuracy. Four-bit floating point (FP4), the lowest-precision format that preserves essential numerical properties such as exponent and sign, has begun to be adopted in cutting-edge architectures, including Blackwell and AMD CDNA, to support LLM quantization and reduce deployment costs. Although aggressive quantization can yield efficiency gains, the quantization sensitivity of within-transformer layers and whether these sensitivities generalize across existing FP4 formats and model scales remain underexplored. To elucidate quantization sensitivity, this study conducts a systematic analysis of two FP4 formats, MXFP4 and NVFP4, across three Qwen2.5 model scales (0.5B, 7B, and 14B), using controlled component-wise and block-wise isolation methodologies. We observe that MLP up- and down-projection layers consistently dominate in terms of sensitivity, while gate and attention projections are moderately and substantially less sensitive to FP4 quantization, respectively. We further find that sensitivity does not universally localize to the final blocks, but early blocks can be highly sensitive, particularly under MXFP4. Our results provide a diagnostic characterization of the inference behavior of FP4 across components, depths, and FP4 formats.

Content moderation systems classify images as safe or unsafe but lack spatial grounding and interpretability: they cannot explain what sensitive behavior was detected, who is involved, or where it occurs. We introduce the Sensitive Benchmark (SenBen), the first large-scale scene graph benchmark for sensitive content, comprising 13,999 frames from 157 movies annotated with Visual Genome-style scene graphs (25 object classes, 28 attributes including affective states such as pain, fear, aggression, and distress, 14 predicates) and 16 sensitivity tags across 5 categories. We distill a frontier VLM into a compact 241M student model using a multi-task recipe that addresses vocabulary imbalance in autoregressive scene graph generation through suffix-based object identity, Vocabulary-Aware Recall (VAR) Loss, and a decoupled Query2Label tag head with asymmetric loss, yielding a +6.4 percentage point improvement in SenBen Recall over standard cross-entropy training. On grounded scene graph metrics, our student model outperforms all evaluated VLMs except Gemini models and all commercial safety APIs, while achieving the highest object detection and captioning scores across all models, at 7.6times faster inference and 16times less GPU memory.

Large language models (LLMs) have demonstrated impressive capabilities across various tasks, but their performance is highly sensitive to the prompts utilized. This variability poses challenges for accurate assessment and user satisfaction. Current research frequently overlooks instance-level prompt variations and their implications on subjective evaluations. To address these shortcomings, we introduce ProSA, a framework designed to evaluate and comprehend prompt sensitivity in LLMs. ProSA incorporates a novel sensitivity metric, PromptSensiScore, and leverages decoding confidence to elucidate underlying mechanisms. Our extensive study, spanning multiple tasks, uncovers that prompt sensitivity fluctuates across datasets and models, with larger models exhibiting enhanced robustness. We observe that few-shot examples can alleviate this sensitivity issue, and subjective evaluations are also susceptible to prompt sensitivities, particularly in complex, reasoning-oriented tasks. Furthermore, our findings indicate that higher model confidence correlates with increased prompt robustness. We believe this work will serve as a helpful tool in studying prompt sensitivity of LLMs. The project is released at: https://github.com/open-compass/ProSA .

Current reading comprehension models generalise well to in-distribution test sets, yet perform poorly on adversarially selected inputs. Most prior work on adversarial inputs studies oversensitivity: semantically invariant text perturbations that cause a model's prediction to change when it should not. In this work we focus on the complementary problem: excessive prediction undersensitivity, where input text is meaningfully changed but the model's prediction does not, even though it should. We formulate a noisy adversarial attack which searches among semantic variations of the question for which a model erroneously predicts the same answer, and with even higher probability. Despite comprising unanswerable questions, both SQuAD2.0 and NewsQA models are vulnerable to this attack. This indicates that although accurate, models tend to rely on spurious patterns and do not fully consider the information specified in a question. We experiment with data augmentation and adversarial training as defences, and find that both substantially decrease vulnerability to attacks on held out data, as well as held out attack spaces. Addressing undersensitivity also improves results on AddSent and AddOneSent, and models furthermore generalise better when facing train/evaluation distribution mismatch: they are less prone to overly rely on predictive cues present only in the training set, and outperform a conventional model by as much as 10.9% F1.

LLMs demonstrate promising performance in software vulnerability detection after fine-tuning. However, it remains unclear whether these gains reflect a genuine understanding of vulnerability root causes or merely an exploitation of functional patterns. In this paper, we identify a critical failure mode termed the "semantic trap," where fine-tuned LLMs achieve high detection scores by associating certain functional domains with vulnerability likelihood rather than reasoning about the underlying security semantics. To systematically evaluate this phenomenon, we propose TrapEval, a comprehensive evaluation framework designed to disentangle vulnerability root cause from functional pattern. TrapEval introduces two complementary datasets derived from real-world open-source projects: V2N, which pairs vulnerable code with unrelated benign code, and V2P, which pairs vulnerable code with its corresponding patched version, forcing models to distinguish near-identical code that differs only in subtle security-critical logic. Using TrapEval, we fine-tune five representative state-of-the-art LLMs across three model families and evaluate them under cross-dataset testing, semantic-preserving perturbations, and varying degrees of semantic gap measured by CodeBLEU. Our empirical results reveal that, despite improvements in metrics, fine-tuned LLMs consistently struggle to distinguish vulnerable code from its patched counterpart, exhibit severe robustness degradation under minor semantic-preserving transformations, and rely heavily on functional-context shortcuts when the semantic gap is small. These findings provide strong evidence that current fine-tuning practices often fail to impart true vulnerability reasoning. Our findings serve as a wake-up call: high benchmark scores on traditional datasets may be illusory, masking the model's inability to understand the true causal logic of vulnerabilities.

Context can change whether a request is harmful without changing its topic or surface form. We ask whether residual-stream probes distinguish harmful requests from surface-matched benign controls at a useful operating point. Across three 7-8B model families, an activation sensor blocks 95.5-97.7 percent of judge-classified compliant attacks in a taxonomy-selected set. It also blocks 59.6-68.4 percent of XSTest prompts. A fully disjoint audit reconstructs near-ceiling source-contrast AUROC (0.996-0.999), but fixed transfer to matched pairs is weaker: 0.656-0.819 on the guard-selected Twin-n70 subset and 0.590-0.690 on the full Twin-n163 cohort. We test ten axes on the reference family and seven across all families with leakage, hold-out, and permutation controls. On Twin-n163, no axis evaluated without direct pair-boundary fitting reaches the specified numerical threshold. Requiring persistence on that full cohort was added at analysis time. A separately specified 24B/32B extension gives the same result. Pair-trained classifiers weaken under category and generation-batch hold-out and false-block 79.6-100 percent of XSTest at 95 percent in-corpus TPR. At the tested read points, these activation scores behave as broad-risk detectors rather than standalone context adjudicators.

Saliency maps are increasingly used as design guidance in siRNA efficacy prediction, yet attribution methods are rarely validated before motivating sequence edits. We introduce a pre-synthesis gate: a protocol for counterfactual sensitivity faithfulness that tests whether mutating high-saliency positions changes model output more than composition-matched controls. Cross-dataset transfer reveals two failure modes that would otherwise go undetected: faithful-but-wrong (saliency valid, predictions fail) and inverted saliency (top-saliency edits less impactful than random). Strikingly, models trained on mRNA-level assays collapse on a luciferase reporter dataset, demonstrating that protocol shifts can silently invalidate deployment. Across four benchmarks, 19/20 fold instances pass; the single failure shows inverted saliency. A biology-informed regularizer (BioPrior) strengthens saliency faithfulness with modest, dataset-dependent predictive trade-offs. Our results establish saliency validation as essential pre-deployment practice for explanation-guided therapeutic design. Code is available at https://github.com/shadi97kh/BioPrior.

Decoding methods play an indispensable role in converting language models from next-token predictors into practical task solvers. Prior research on decoding methods, primarily focusing on task-specific models, may not extend to the current era of general-purpose large language models (LLMs). Moreover, the recent influx of decoding strategies has further complicated this landscape. This paper provides a comprehensive and multifaceted analysis of various decoding methods within the context of LLMs, evaluating their performance, robustness to hyperparameter changes, and decoding speeds across a wide range of tasks, models, and deployment environments. Our findings reveal that decoding method performance is notably task-dependent and influenced by factors such as alignment, model size, and quantization. Intriguingly, sensitivity analysis exposes that certain methods achieve superior performance at the cost of extensive hyperparameter tuning, highlighting the trade-off between attaining optimal results and the practicality of implementation in varying contexts.

Deep neural networks include millions of learnable parameters, making their deployment over resource-constrained devices problematic. SeReNe (Sensitivity-based Regularization of Neurons) is a method for learning sparse topologies with a structure, exploiting neural sensitivity as a regularizer. We define the sensitivity of a neuron as the variation of the network output with respect to the variation of the activity of the neuron. The lower the sensitivity of a neuron, the less the network output is perturbed if the neuron output changes. By including the neuron sensitivity in the cost function as a regularization term, we areable to prune neurons with low sensitivity. As entire neurons are pruned rather then single parameters, practical network footprint reduction becomes possible. Our experimental results on multiple network architectures and datasets yield competitive compression ratios with respect to state-of-the-art references.

Large language models are highly sensitive to prompts, but this sensitivity is usually studied through task-relevant instructions, demonstrations, or reasoning cues. In this paper, we study a different form of prompt sensitivity: whether prompts that are semantically unrelated to the task can nevertheless steer model behavior. We call them spurious prompts and show their surprising efficacy. We also propose a simple black-box search procedure for discovering them. Across reasoning and question-answering benchmarks, using models ranging from 0.8B to 27B parameters and spanning three model families, we show that spurious prompts can improve performance, often matching or outperforming standard prompting baselines and task-aware prompt optimization. We further show that they can steer models toward unintended behaviors, such as repeatedly selecting the first answer option, producing incorrect answers, returning an even, prime or small number without explicitly instructing the model to do so. These findings reveal a new kind of prompt sensitivity: LLMs can be systematically steered by prompts that are unrelated to the task they are asked to solve. Our code is available at https://github.com/Batorskq/spurious

Existing evaluation methods largely rely on clean, static benchmarks, which can overestimate true model performance by failing to capture the noise and variability inherent in real-world user inputs. This is especially true for language models, which can face human-generated text queries containing mistakes, typos, or alternative ways of phrasing the same question. In this work, we introduce a theoretical framework for quantifying model sensitivity to prompt variants, or brittleness, that can enable us to disentangle data-induced difficulty from prompt-related variability. Using this framework, we design a novel evaluation pipeline, Brittlebench, to holistically evaluate the sensitivity of frontier models. We apply semantics-preserving perturbations to a suite of popular benchmarks, and observe model performance to degrade as much as 12%. However, these perturbations do not affect all models equally: even a single perturbation alters the relative ranking of models in 63% of cases, impacting conclusions about comparative model performance. Decomposing the total variance of both state-of-the-art open-weight and commercial models, we find that semantics-preserving input perturbations can account for up to half of the performance variance for a given model. Brittlebench highlights the need for more robust evaluations and models, and allows us to systematically understand model brittleness.

During both pretraining and fine-tuning, Large Language Models (LLMs) are trained on trillions of tokens of text of widely varying quality. Both phases of training typically involve heuristically filtering out ``low-quality'' or noisy training samples, yet little is known quantitatively about how the type or intensity of noise affects downstream performance. In this work, we study how noise in chain of thought (CoT) impacts task performance in the highly-controlled setting of algorithmically solvable tasks. First, we develop the Traced Integer (TInt) framework to generate highly customizable noised execution traces for any arithmetic function on lists of integers. We then define two types of noise: static noise, a local form of noise which is applied after the CoT trace is computed, and dynamic noise, a global form of noise which propagates errors in the trace as it is computed. We then evaluate the test performance of pretrained models both prompted and fine-tuned on noised datasets with varying levels of dataset contamination and intensity. We find fine-tuned models are extremely robust to high levels of static noise but struggle significantly more with lower levels of dynamic noise. In contrast, few-shot prompted models appear more sensitive to even static noise. We conclude with a discussion of how our findings impact noise filtering best-practices, in particular emphasizing the importance of removing samples containing destructive dynamic noise with global errors.

Modern AI systems increasingly comprise multiple interconnected neural networks to tackle complex inference tasks. Testing such systems for robustness and safety entails significant challenges. Current state-of-the-art robustness testing techniques, whether black-box or white-box, have been proposed and implemented for single-network models and do not scale well to multi-network pipelines. We propose a modular robustness testing framework that applies a given set of perturbations to test data. Our testing framework supports (1) a component-wise system analysis to isolate errors and (2) reasoning about error propagation across the neural network modules. The testing framework is architecture and modality agnostic and can be applied across domains. We apply the framework to a real-world autonomous rail inspection system composed of multiple deep networks and successfully demonstrate how our approach enables fine-grained robustness analysis beyond conventional end-to-end metrics.

Humans are prone to cognitive distortions -- biased thinking patterns that lead to exaggerated responses to specific stimuli, albeit in very different contexts. This paper demonstrates that advanced Multimodal Large Language Models (MLLMs) exhibit similar tendencies. While these models are designed to respond queries under safety mechanism, they sometimes reject harmless queries in the presence of certain visual stimuli, disregarding the benign nature of their contexts. As the initial step in investigating this behavior, we identify three types of stimuli that trigger the oversensitivity of existing MLLMs: Exaggerated Risk, Negated Harm, and Counterintuitive Interpretation. To systematically evaluate MLLMs' oversensitivity to these stimuli, we propose the Multimodal OverSenSitivity Benchmark (MOSSBench). This toolkit consists of 300 manually collected benign multimodal queries, cross-verified by third-party reviewers (AMT). Empirical studies using MOSSBench on 20 MLLMs reveal several insights: (1). Oversensitivity is prevalent among SOTA MLLMs, with refusal rates reaching up to 76% for harmless queries. (2). Safer models are more oversensitive: increasing safety may inadvertently raise caution and conservatism in the model's responses. (3). Different types of stimuli tend to cause errors at specific stages -- perception, intent reasoning, and safety judgement -- in the response process of MLLMs. These findings highlight the need for refined safety mechanisms that balance caution with contextually appropriate responses, improving the reliability of MLLMs in real-world applications. We make our project available at https://turningpoint-ai.github.io/MOSSBench/.

In the rapidly evolving software development landscape, Python stands out for its simplicity, versatility, and extensive ecosystem. Python packages, as units of organization, reusability, and distribution, have become a pressing concern, highlighted by the considerable number of vulnerability reports. As a scripting language, Python often cooperates with other languages for performance or interoperability. This adds complexity to the vulnerabilities inherent to Python packages, and the effectiveness of current vulnerability detection tools remains underexplored. This paper addresses these gaps by introducing PyVul, the first comprehensive benchmark suite of Python-package vulnerabilities. PyVul includes 1,157 publicly reported, developer-verified vulnerabilities, each linked to its affected packages. To accommodate diverse detection techniques, it provides annotations at both commit and function levels. An LLM-assisted data cleansing method is incorporated to improve label accuracy, achieving 100% commit-level and 94% function-level accuracy, establishing PyVul as the most precise large-scale Python vulnerability benchmark. We further carry out a distribution analysis of PyVul, which demonstrates that vulnerabilities in Python packages involve multiple programming languages and exhibit a wide variety of types. Moreover, our analysis reveals that multi-lingual Python packages are potentially more susceptible to vulnerabilities. Evaluation of state-of-the-art detectors using this benchmark reveals a significant discrepancy between the capabilities of existing tools and the demands of effectively identifying real-world security issues in Python packages. Additionally, we conduct an empirical review of the top-ranked CWEs observed in Python packages, to diagnose the fine-grained limitations of current detection tools and highlight the necessity for future advancements in the field.

Researchers and practitioners increasingly apply Large Language Models (LLMs) for automated vulnerability detection. Recent work has shown that LLMs are susceptible to the same cognitive heuristics that bias human judgment. Yet, no work has investigated whether these heuristics affect a model's assessment of code vulnerabilities. In this paper, we present the first systematic exploration of cognitive heuristics in LLM-driven code vulnerability detection. We introduce a controlled framework that holds the code fixed and only varies the surrounding context to trigger three cognitive heuristics: the halo effect through author attribution, the framing effect through task objectives and consequences, and the anchoring effect through prior analysis results. Within this framework, we evaluate eight LLMs across three programming languages and perform both quantitative and code-level analyses. Our findings demonstrate that all evaluated models are susceptible to these heuristics. Cross-model average susceptibility is highest for framing at 33.2%, followed by anchoring at 23.5% and halo at 18.4%. Code-level analysis reveals that vulnerabilities that require semantic reasoning for detection are more susceptible to cognitive heuristics than those identifiable through pattern matching. Furthermore, models often change their verdict from safe to vulnerable based on the cognitive condition, without accurately identifying the actual vulnerability. To highlight the practical impact, we demonstrate a proof-of-concept black-box cognitive attack that can suppress up to 97% of previously detected vulnerabilities. These findings indicate that cognitive susceptibility is a consistent and exploitable property of LLM-based vulnerability detection.

When making predictions, a language model must trade off how much it relies on its context vs. its prior knowledge. Choosing how sensitive the model is to its context is a fundamental functionality, as it enables the model to excel at tasks like retrieval-augmented generation and question-answering. In this paper, we search for a knob which controls this sensitivity, determining whether language models answer from the context or their prior knowledge. To guide this search, we design a task for controllable context sensitivity. In this task, we first feed the model a context (Paris is in England) and a question (Where is Paris?); we then instruct the model to either use its prior or contextual knowledge and evaluate whether it generates the correct answer for both intents (either France or England). When fine-tuned on this task, instruction-tuned versions of Llama-3.1, Mistral-v0.3, and Gemma-2 can solve it with high accuracy (85-95%). Analyzing these high-performing models, we narrow down which layers may be important to context sensitivity using a novel linear time algorithm. Then, in each model, we identify a 1-D subspace in a single layer that encodes whether the model follows context or prior knowledge. Interestingly, while we identify this subspace in a fine-tuned model, we find that the exact same subspace serves as an effective knob in not only that model but also non-fine-tuned instruct and base models of that model family. Finally, we show a strong correlation between a model's performance and how distinctly it separates context-agreeing from context-ignoring answers in this subspace. These results suggest a single subspace facilitates how the model chooses between context and prior knowledge, hinting at a simple fundamental mechanism that controls this behavior.

We develop a data-driven deep neural operator framework to approximate multiple output states for a diesel engine and generate real-time predictions with reasonable accuracy. As emission norms become more stringent, the need for fast and accurate models that enable analysis of system behavior have become an essential requirement for system development. The fast transient processes involved in the operation of a combustion engine make it difficult to develop accurate physics-based models for such systems. As an alternative to physics based models, we develop an operator-based regression model (DeepONet) to learn the relevant output states for a mean-value gas flow engine model using the engine operating conditions as input variables. We have adopted a mean-value model as a benchmark for comparison, simulated using Simulink. The developed approach necessitates using the initial conditions of the output states to predict the accurate sequence over the temporal domain. To this end, a sequence-to-sequence approach is embedded into the proposed framework. The accuracy of the model is evaluated by comparing the prediction output to ground truth generated from Simulink model. The maximum mathcal L_2 relative error observed was approximately 6.5%. The sensitivity of the DeepONet model is evaluated under simulated noise conditions and the model shows relatively low sensitivity to noise. The uncertainty in model prediction is further assessed by using a mean ensemble approach. The worst-case error at the (mu + 2sigma) boundary was found to be 12%. The proposed framework provides the ability to predict output states in real-time and enables data-driven learning of complex input-output operator mapping. As a result, this model can be applied during initial development stages, where accurate models may not be available.

Visual-Language-Action (VLA) models report impressive success rates on robotic manipulation benchmarks, yet these results may mask fundamental weaknesses in robustness. We perform a systematic vulnerability analysis by introducing controlled perturbations across seven dimensions: objects layout, camera viewpoints, robot initial states, language instructions, light conditions, background textures and sensor noise. We comprehensively analyzed multiple state-of-the-art models and revealed consistent brittleness beneath apparent competence. Our analysis exposes critical weaknesses: models exhibit extreme sensitivity to perturbation factors, including camera viewpoints and robot initial states, with performance dropping from 95% to below 30% under modest perturbations. Surprisingly, models are largely insensitive to language variations, with further experiments revealing that models tend to ignore language instructions completely. Our findings challenge the assumption that high benchmark scores equate to true competency and highlight the need for evaluation practices that assess reliability under realistic variation.

Recent studies of the emergent capabilities of transformer-based Natural Language Understanding (NLU) models have indicated that they have an understanding of lexical and compositional semantics. We provide evidence that suggests these claims should be taken with a grain of salt: we find that state-of-the-art Natural Language Inference (NLI) models are sensitive towards minor semantics preserving surface-form variations, which lead to sizable inconsistent model decisions during inference. Notably, this behaviour differs from valid and in-depth comprehension of compositional semantics, however does neither emerge when evaluating model accuracy on standard benchmarks nor when probing for syntactic, monotonic, and logically robust reasoning. We propose a novel framework to measure the extent of semantic sensitivity. To this end, we evaluate NLI models on adversarially generated examples containing minor semantics-preserving surface-form input noise. This is achieved using conditional text generation, with the explicit condition that the NLI model predicts the relationship between the original and adversarial inputs as a symmetric equivalence entailment. We systematically study the effects of the phenomenon across NLI models for in- and out-of- domain settings. Our experiments show that semantic sensitivity causes performance degradations of 12.92% and 23.71% average over in- and out-of- domain settings, respectively. We further perform ablation studies, analysing this phenomenon across models, datasets, and variations in inference and show that semantic sensitivity can lead to major inconsistency within model predictions.

VLM safety is commonly evaluated through input- and output-level classification. Such classification is necessary, but it does not reveal whether a safety state is accessible or controllable inside the model. We argue that multimodal safety evaluation should therefore report a controllability profile alongside behavioral classification, separating representation-level detectability, cross-modal specificity, intervention sensitivity, and benign-preserving selectivity. Using implicit toxicity as a stress case, we instantiate this profile on LlavaGuard and Qwen3.5 with sparse feature decompositions. LlavaGuard admits localized handles with a narrow benign-preserving intervention range and modest downstream safety gains, whereas Qwen3.5 supports strong representation-level readout but no comparable selective-control regime under the tested operators. These results show that internal readout and controllability can diverge. Future multimodal safety benchmarks should therefore report not only behavioral safety metrics, but also whether safety-relevant internal signals can be intervention-tested and controlled within a validated operating range.

Transformers achieve state-of-the-art accuracy and robustness across many tasks, but an understanding of the inductive biases that they have and how those biases are different from other neural network architectures remains elusive. Various neural network architectures such as fully connected networks have been found to have a simplicity bias towards simple functions of the data; one version of this simplicity bias is a spectral bias to learn simple functions in the Fourier space. In this work, we identify the notion of sensitivity of the model to random changes in the input as a notion of simplicity bias which provides a unified metric to explain the simplicity and spectral bias of transformers across different data modalities. We show that transformers have lower sensitivity than alternative architectures, such as LSTMs, MLPs and CNNs, across both vision and language tasks. We also show that low-sensitivity bias correlates with improved robustness; furthermore, it can also be used as an efficient intervention to further improve the robustness of transformers.

Model developers implement safeguards in frontier models to prevent misuse, for example, by employing classifiers to filter dangerous outputs. In this work, we demonstrate that even robustly safeguarded models can be used to elicit harmful capabilities in open-source models through elicitation attacks. Our elicitation attacks consist of three stages: (i) constructing prompts in adjacent domains to a target harmful task that do not request dangerous information; (ii) obtaining responses to these prompts from safeguarded frontier models; (iii) fine-tuning open-source models on these prompt-output pairs. Since the requested prompts cannot be used to directly cause harm, they are not refused by frontier model safeguards. We evaluate these elicitation attacks within the domain of hazardous chemical synthesis and processing, and demonstrate that our attacks recover approximately 40% of the capability gap between the base open-source model and an unrestricted frontier model. We then show that the efficacy of elicitation attacks scales with the capability of the frontier model and the amount of generated fine-tuning data. Our work demonstrates the challenge of mitigating ecosystem level risks with output-level safeguards.

Prior work evaluates code generation bias primarily through simple conditional statements, which represent only a narrow slice of real-world programming and reveal solely overt, explicitly encoded bias. We demonstrate that this approach dramatically underestimates bias in practice by examining a more realistic task: generating machine learning (ML) pipelines. Testing both code-specialized and general-instruction large language models, we find that generated pipelines exhibit significant bias during feature selection. Sensitive attributes appear in 87.7% of cases on average, despite models demonstrably excluding irrelevant features (e.g., including "race" while dropping "favorite color" for credit scoring). This bias is substantially more prevalent than that captured by conditional statements, where sensitive attributes appear in only 59.2% of cases. These findings are robust across prompt mitigation strategies, varying numbers of attributes, and different pipeline difficulty levels. Our results challenge simple conditionals as valid proxies for bias evaluation and suggest current benchmarks underestimate bias risk in practical deployments.

Safety benchmarks assume that test-condition behavior predicts deployment behavior, an assumption that fails if models detect evaluation cues and adapt. This opens a gap between benchmark performance and deployment behavior: compliance measured under test conditions becomes an optimistic upper bound that overstates how safely a model behaves once the evaluation harness is removed. We characterize this evaluation awareness through eight experiments across 37 open-weight models and seven families. (i)Detection is moderate and training-driven (24/37 models exceed chance, best AUROC 0.714 vs.0.819 human, with instruction tuning dominating over scale). (ii)Detection shifts safety behavior (hard refusal drops 5.8 percentage points under hypothetical framing, and 21/140 HarmBench framing effects are significant, with compliance rising up to +30 percentage points. (iii)Representations survive behavioral collapse (probes retain AUROC 0.98 under rewrites that drive behavior below chance, and multi-layer steering causally moves three downstream tasks while random controls do not). (iv)These axes are weakly coupled (only 1/15 correlations are significant, the sole robust link being behavioral detection versus framing resistance, ρ=-0.79, p<0.001). We call this gap the benchmark illusion: because detectability, behavioral manifestation, and controllability vary independently, it is multivariate rather than a single number, so no single awareness score is a reliable proxy for deployment safety.

Static analysis is a cornerstone for software vulnerability detection, yet it often struggles with the classic precision-scalability trade-off. In practice, such tools often produce high false positive rates, particularly in large codebases like the Linux kernel. This imprecision can arise from simplified vulnerability modeling and over-approximation of path and data constraints. While large language models (LLMs) show promise in code understanding, their naive application to program analysis yields unreliable results due to inherent reasoning limitations. We introduce BugLens, a post-refinement framework that significantly improves static analysis precision. BugLens guides an LLM to follow traditional analysis steps by assessing buggy code patterns for security impact and validating the constraints associated with static warnings. Evaluated on real-world Linux kernel bugs, BugLens raises precision from 0.10 (raw) and 0.50 (semi-automated refinement) to 0.72, substantially reducing false positives and revealing four previously unreported vulnerabilities. Our results suggest that a structured LLM-based workflow can meaningfully enhance the effectiveness of static analysis tools.

The rapid advancement of large language models (LLMs) introduces dual-use capabilities that could both threaten and bolster national security and public safety (NSPS). Models implement safeguards to protect against potential misuse relevant to NSPS and allow for benign users to receive helpful information. However, current benchmarks often fail to test safeguard robustness to potential NSPS risks in an objective, robust way. We introduce FORTRESS: 500 expert-crafted adversarial prompts with instance-based rubrics of 4-7 binary questions for automated evaluation across 3 domains (unclassified information only): Chemical, Biological, Radiological, Nuclear and Explosive (CBRNE), Political Violence & Terrorism, and Criminal & Financial Illicit Activities, with 10 total subcategories across these domains. Each prompt-rubric pair has a corresponding benign version to test for model over-refusals. This evaluation of frontier LLMs' safeguard robustness reveals varying trade-offs between potential risks and model usefulness: Claude-3.5-Sonnet demonstrates a low average risk score (ARS) (14.09 out of 100) but the highest over-refusal score (ORS) (21.8 out of 100), while Gemini 2.5 Pro shows low over-refusal (1.4) but a high average potential risk (66.29). Deepseek-R1 has the highest ARS at 78.05, but the lowest ORS at only 0.06. Models such as o1 display a more even trade-off between potential risks and over-refusals (with an ARS of 21.69 and ORS of 5.2). To provide policymakers and researchers with a clear understanding of models' potential risks, we publicly release FORTRESS at https://huggingface.co/datasets/ScaleAI/fortress_public. We also maintain a private set for evaluation.

Recent advances in large language models (LLMs) have led to their extensive global deployment, and ensuring their safety calls for comprehensive and multilingual toxicity evaluations. However, existing toxicity benchmarks are overwhelmingly focused on English, posing serious risks to deploying LLMs in other languages. We address this by introducing PolygloToxicityPrompts (PTP), the first large-scale multilingual toxicity evaluation benchmark of 425K naturally occurring prompts spanning 17 languages. We overcome the scarcity of naturally occurring toxicity in web-text and ensure coverage across languages with varying resources by automatically scraping over 100M web-text documents. Using PTP, we investigate research questions to study the impact of model size, prompt language, and instruction and preference-tuning methods on toxicity by benchmarking over 60 LLMs. Notably, we find that toxicity increases as language resources decrease or model size increases. Although instruction- and preference-tuning reduce toxicity, the choice of preference-tuning method does not have any significant impact. Our findings shed light on crucial shortcomings of LLM safeguarding and highlight areas for future research.

When training data are collected from human annotators, the design of the annotation instrument, the instructions given to annotators, the characteristics of the annotators, and their interactions can impact training data. This study demonstrates that design choices made when creating an annotation instrument also impact the models trained on the resulting annotations. We introduce the term annotation sensitivity to refer to the impact of annotation data collection methods on the annotations themselves and on downstream model performance and predictions. We collect annotations of hate speech and offensive language in five experimental conditions of an annotation instrument, randomly assigning annotators to conditions. We then fine-tune BERT models on each of the five resulting datasets and evaluate model performance on a holdout portion of each condition. We find considerable differences between the conditions for 1) the share of hate speech/offensive language annotations, 2) model performance, 3) model predictions, and 4) model learning curves. Our results emphasize the crucial role played by the annotation instrument which has received little attention in the machine learning literature. We call for additional research into how and why the instrument impacts the annotations to inform the development of best practices in instrument design.

Large Language Models (LLMs) are increasingly deployed via third-party system prompts downloaded from public marketplaces. We identify a critical supply-chain vulnerability: conditional system prompt poisoning, where an adversary injects a ``sleeper agent'' into a benign-looking prompt. Unlike traditional jailbreaks that aim for broad refusal-breaking, our proposed framework, SPECTRE, optimizes system prompts to trigger LLMs to output targeted, compromised responses only for specific queries (e.g., ``Who should I vote for the US President?'') while maintaining high utility on benign inputs. Operating in a strict black-box setting without model weight access, SPECTRE utilizes a two-stage optimization including a global semantic search followed by a greedy lexical refinement. Tested on open-source models and commercial APIs (GPT-4o-mini, GPT-3.5), SPECTRE achieves up to 70% F1 reduction on targeted queries with minimal degradation to general capabilities. We further demonstrate that these poisoned prompts evade standard defenses, including perplexity filters and typo-correction, by exploiting the natural noise found in real-world system prompts. Our code and data are available at https://github.com/vietph34/CAIN. WARNING: Our paper contains examples that might be sensitive to the readers!

Code generation models have achieved impressive performance. However, they tend to be brittle as slight edits to a prompt could lead to very different generations; these robustness properties, critical for user experience when deployed in real-life applications, are not well understood. Most existing works on robustness in text or code tasks have focused on classification, while robustness in generation tasks is an uncharted area and to date there is no comprehensive benchmark for robustness in code generation. In this paper, we propose ReCode, a comprehensive robustness evaluation benchmark for code generation models. We customize over 30 transformations specifically for code on docstrings, function and variable names, code syntax, and code format. They are carefully designed to be natural in real-life coding practice, preserve the original semantic meaning, and thus provide multifaceted assessments of a model's robustness performance. With human annotators, we verified that over 90% of the perturbed prompts do not alter the semantic meaning of the original prompt. In addition, we define robustness metrics for code generation models considering the worst-case behavior under each type of perturbation, taking advantage of the fact that executing the generated code can serve as objective evaluation. We demonstrate ReCode on SOTA models using HumanEval, MBPP, as well as function completion tasks derived from them. Interesting observations include: better robustness for CodeGen over InCoder and GPT-J; models are most sensitive to syntax perturbations; more challenging robustness evaluation on MBPP over HumanEval.

An LLM safety patch can pass a benchmark while still being a poor repair. This risk is especially acute for jailbreak repairs, where the goal is to correct a specific unsafe behaviour without changing unrelated behaviours. A patch may block exact evaluation prompts yet fail on close harmful variants, or suppress harmful behaviour by over-refusing benign prompts that share its wording or structure. Existing protocols primarily test whether models can be broken, while aggregate metrics (attack success, refusal rates, global capability) cannot distinguish selective repairs from broader local suppression. To address this gap, we introduce PatchBench, a benchmark of empirically observed model-specific jailbreak failures inducing actionable harmful answers. Starting from 27,870 prompts from 37 public datasets, we curate 15,314 English prompts and query 8 open-source instruction-tuned models. Combining WildGuard filtering, pairwise Elo ranking, and manual verification, we retain a curated bank of 400 high-confidence jailbreak failures. We further introduce PatchBench-Local, an evaluation protocol testing whether a patch is behaviourally precise. For each harmful source prompt, PatchBench-Local generates three families of local neighbours: harmful variants preserving malicious intent, benign prompts with matched structure, and benign prompts reusing key harmful terms. It evaluates harmful-neighbour correction and benign-neighbour preservation, distinguishing selective repair from broader local suppression. Evaluating four activation steering methods with PatchBench-Local and MMLU shows that global capability can remain nearly unchanged while local benign regressions are severe, confirming aggregate metrics miss important collateral damage. PatchBench-Local provides a more precise basis for developing and comparing jailbreak repair methods.

A butterfly effect occurs when a local perturbation propagates through a system and produces divergence in its collective outcome. In LLM social simulations, this creates a particular challenge for scientific inference: sensitivity to implementation choices can enter agent interactions and alter the collective outcomes on which scientific claims are based. We study this problem through a repeated Prisoner's Dilemma and a social-media echo chamber, spanning representation- and design-level perturbations across four LLM families. We find that controlled perturbations can substantially alter collective outcomes, with sensitivity varying across both perturbations and models. In the Prisoner's Dilemma, changing only the representation of a matched persona shifts two-agent cooperation by 75.2 percentage points for GPT-5.2, while game framing and memory representation produce smaller or less consistent effects. Multi-agent interaction further reshapes representation sensitivity, producing amplification or attenuation depending on the model and perturbation. In the echo-chamber simulation, persona representation changes interaction targeting and is accompanied by divergence in collective interaction structure, extending representation sensitivity from agent behavior to network-level outcomes. These results show that robustness cannot be inferred from a single simulation configuration and that local sensitivity can change as it propagates through interaction. We introduce TRAILS (Taxonomy for Robustness Audits In LLM Simulations) and the Social Simulation Audit Card as a framework for systematically auditing these dependencies and calibrating the scope of scientific claims to the robustness evidence that supports them.

Mixed-precision quantization must decide which parts of a model to keep at higher precision. A common premise, shared by sensitivity-based methods such as HAWQ and CoopQ, is that the loss from quantizing a set of layers can be reconstructed from per-layer or pairwise sensitivities measured in isolation. We test this premise at the 4-bit weight-and-activation precisions now being deployed, treating the change in loss f(S) from quantizing a layer set S as a set function on the Boolean cube and analyzing it through two classical changes of basis. This analysis yields two findings. First, across configurations drawn from the deployment distribution, 85--93\% of the variance of f is explained by per-layer effects alone. Second, a monotone transform of a sum of per-layer terms reproduces f's ranking of configurations, misordering at most 2\% of pairs. We propose the coverage model f(S)=cbigl(1-prod_{iin S}(1-a_i)bigr), which reproduces the measured variance profile of f to within a few percent from its L fitted break-rates. This structure supports two predictors of a configuration's loss, each with L+1 parameters. The additive model is the optimal first-order predictor. By Parseval's identity its mean-squared error equals the variance of f left unexplained by per-layer effects, which we measure on full lattices, estimate out of sample at full-network scale, and report with every result as a certificate of how well any additive model can do. The coverage model itself is the second predictor. As allocators at matched memory, they attain the lowest KL divergence among the compared allocators on models from 30B to 355B parameters. Below four bits, the resulting allocations continue to solve code and reasoning tasks at budgets where allocations from gradient sensitivities no longer produce terminating generations.

Large language models are increasingly deployed in education as tutors, teaching assistants, and content generators. These roles place demands that ordinary question answering does not: a usable education-facing model is supposed to be accurate, safe under sensitive prompts, instructionally useful, and aligned with pedagogical goals at the same time. Existing benchmarks evaluate these requirements largely in isolation, so none assesses education-facing suitability as an integrated profile. We introduce ELBench, the first benchmark to evaluate all four requirements (General Capability, Safety and Trustworthiness, Basic Education, and High-Level Cultivation) on the same models under a common protocol, combining curated public sources with newly synthesized safety and cultivation data. We evaluate nine models, seven frontier general-purpose systems and two education-specialized variants, and report three findings. First, module-level profiles are more informative than a single aggregate: the top six models are statistically indistinguishable on overall score, yet their module leaders differ substantially, and safety is anti-correlated with practical teaching (r = -0.83). Second, the Chinese-developed models lead the safety module, the most discriminative in the suite; this advantage is largest on region-specific normative content and narrows, but does not vanish, on universal-harm content. Third, the two education-specialized models lead neither education module, and on High-Level Cultivation all models share a systematic blind spot: on the structured judgment task they converge on the same non-reference option, favoring pedagogical style over fit to the stated goal, so the module scores uniformly low and does not separate models. This raises, but does not resolve, whether domain post-training keeps pace with frontier systems on education tasks.

Production LLMs receive instructions from sources with very different levels of trust, yet attend to every token with uniform architectural privilege. This is the structural vulnerability that enables malicious prompt injections and, more broadly, leaves models without a principled way to resolve conflicts between legitimate but competing instructions. A common training-based response is to teach models an explicit instruction hierarchy; existing approaches, however, formalize hierarchies of only three or four levels, treat all violations as equally severe, and rarely evaluate the full set of pairwise level interactions. We formalize a k-level instruction hierarchy problem and instantiate it for k=5, yielding ten pairwise priority relations that a compliant model must enforce. We then introduce Gravity-Weighted DPO (GW-DPO), a preference-optimization objective whose per-sample offset scales with the structural distance between conflicting levels under a linear or bilateral schedule, the latter weighting severity by both the privilege gap and the privilege of the victim level. Combined with hierarchy-specific delimiter tokens (Chen et al., 2025) and Instructional Segment Embeddings (ISE; Wu et al., 2025), GW-DPO with the bilateral schedule Pareto-improves over standard DPO and the linear variant on Llama-3.1-8B-Instruct, raising macro pairwise priority adherence while keeping over-refusal at half the standard DPO rate. Ablations isolate ISE as a refusal-threshold calibrator and recast five- versus three-level training as a generality-specialization tradeoff.

Deep learning models are known to exhibit a strong texture bias, while human tends to rely heavily on global shape structure for object recognition. The current benchmark for evaluating a model's global shape bias is a set of style-transferred images with the assumption that resistance to the attack of style transfer is related to the development of global structure sensitivity in the model. In this work, we show that networks trained with style-transfer images indeed learn to ignore style, but its shape bias arises primarily from local detail. We provide a Disrupted Structure Testbench (DiST) as a direct measurement of global structure sensitivity. Our test includes 2400 original images from ImageNet-1K, each of which is accompanied by two images with the global shapes of the original image disrupted while preserving its texture via the texture synthesis program. We found that black{(1) models that performed well on the previous cue-conflict dataset do not fare well in the proposed DiST; (2) the supervised trained Vision Transformer (ViT) lose its global spatial information from positional embedding, leading to no significant advantages over Convolutional Neural Networks (CNNs) on DiST. While self-supervised learning methods, especially mask autoencoder significantly improves the global structure sensitivity of ViT. (3) Improving the global structure sensitivity is orthogonal to resistance to style-transfer, indicating that the relationship between global shape structure and local texture detail is not an either/or relationship. Training with DiST images and style-transferred images are complementary, and can be combined to train network together to enhance the global shape sensitivity and robustness of local features.} Our code will be hosted in github: https://github.com/leelabcnbc/DiST

Prior work has shown that fine-tuning models on a narrow domain with misaligned data can lead to broad misalignment - a phenomenon termed "emergent misalignment" (Betley et al. 2025). While all tested models were susceptible to emergent misalignment, some models showed more resistance than others. Specifically the Qwen-2.5 family proved to be relatively resistant, while GPT-4o exhibited the strongest misalignment. In this paper we evaluate if current-generation open-weights models exhibit similar resistance to the Qwen-2.5 family and measure misalignment robustness over a range of model architectures and scales. We replicate the effect across nine modern open-weights models (Gemma 3 and Qwen 3 families, 1B-32B parameters). Models fine-tuned on insecure code generation show a 0.68% misalignment rate (compared to 0.07% for base models), matching the lower end of prior open-model results but dramatically lower than GPT-4o's 20%. We identify a critical format-dependent vulnerability: requiring JSON output doubles misalignment rates compared to natural language prompts (0.96% vs 0.42%). This suggests that structural constraints may bypass safety training by reducing the model's 'degrees of freedom' to refuse. These findings confirm emergent misalignment as a reproducible phenomenon in modern open-weights models, with rates substantially lower than observed in proprietary systems.

We propose patching for large language models (LLMs) like software versions, a lightweight and modular approach for addressing safety vulnerabilities. While vendors release improved LLM versions, major releases are costly, infrequent, and difficult to tailor to customer needs, leaving released models with known safety gaps. Unlike full-model fine-tuning or major version updates, our method enables rapid remediation by prepending a compact, learnable prefix to an existing model. This "patch" introduces only 0.003% additional parameters, yet reliably steers model behavior toward that of a safer reference model. Across three critical domains (toxicity mitigation, bias reduction, and harmfulness refusal) policy patches achieve safety improvements comparable to next-generation safety-aligned models while preserving fluency. Our results demonstrate that LLMs can be "patched" much like software, offering vendors and practitioners a practical mechanism for distributing scalable, efficient, and composable safety updates between major model releases.

Deep learning models are intrinsically sensitive to distribution shifts in the input data. In particular, small, barely perceivable perturbations to the input data can force models to make wrong predictions with high confidence. An common defense mechanism is regularization through adversarial training which injects worst-case perturbations back into training to strengthen the decision boundaries, and to reduce overfitting. In this context, we perform an investigation of 3x3 convolution filters that form in adversarially-trained models. Filters are extracted from 71 public models of the linf-RobustBench CIFAR-10/100 and ImageNet1k leaderboard and compared to filters extracted from models built on the same architectures but trained without robust regularization. We observe that adversarially-robust models appear to form more diverse, less sparse, and more orthogonal convolution filters than their normal counterparts. The largest differences between robust and normal models are found in the deepest layers, and the very first convolution layer, which consistently and predominantly forms filters that can partially eliminate perturbations, irrespective of the architecture. Data & Project website: https://github.com/paulgavrikov/cvpr22w_RobustnessThroughTheLens

Software ecosystems rely on centralized package registries, such as Maven, to enable code reuse and collaboration. However, the interconnected nature of these ecosystems amplifies the risks posed by security vulnerabilities in direct and transitive dependencies. While numerous studies have examined vulnerabilities in Maven and other ecosystems, there remains a gap in understanding the behavior of vulnerabilities across parent and dependent packages, and the response times of maintainers in addressing vulnerabilities. This study analyzes the lifecycle of 3,362 CVEs in Maven to uncover patterns in vulnerability mitigation and identify factors influencing at-risk packages. We conducted a comprehensive study integrating temporal analyses of CVE lifecycles, correlation analyses of GitHub repository metrics, and assessments of library maintainers' response times to patch vulnerabilities, utilizing a package dependency graph for Maven. A key finding reveals a trend in "Publish-Before-Patch" scenarios: maintainers prioritize patching severe vulnerabilities more quickly after public disclosure, reducing response time by 48.3% from low (151 days) to critical severity (78 days). Additionally, project characteristics, such as contributor absence factor and issue activity, strongly correlate with the presence of CVEs. Leveraging tools such as the Goblin Ecosystem, OSV.dev, and OpenDigger, our findings provide insights into the practices and challenges of managing security risks in Maven.

Despite the remarkable success of deep neural networks in a myriad of settings, several works have demonstrated their overwhelming sensitivity to near-imperceptible perturbations, known as adversarial attacks. On the other hand, prior works have also observed that deep networks can be under-sensitive, wherein large-magnitude perturbations in input space do not induce appreciable changes to network activations. In this work, we study in detail the phenomenon of under-sensitivity in vision models such as CNNs and Transformers, and present techniques to study the geometry and extent of "equi-confidence" level sets of such networks. We propose a Level Set Traversal algorithm that iteratively explores regions of high confidence with respect to the input space using orthogonal components of the local gradients. Given a source image, we use this algorithm to identify inputs that lie in the same equi-confidence level set as the source image despite being perceptually similar to arbitrary images from other classes. We further observe that the source image is linearly connected by a high-confidence path to these inputs, uncovering a star-like structure for level sets of deep networks. Furthermore, we attempt to identify and estimate the extent of these connected higher-dimensional regions over which the model maintains a high degree of confidence. The code for this project is publicly available at https://github.com/SriramB-98/blindspots-neurips-sub

Many post-training quantization (PTQ) methods use layer-wise reconstruction, second-order proxy objectives, or activation-aware transformations to reduce quantization-induced error. Whether that error signal predicts the downstream functional impact of quantizing an individual attention projection has not been directly characterized. We sweep nine open-weight language models (1.3B--8B parameters; OPT, GPT-J, LLaMA-1/2/3, Mistral, Qwen 2.5) and quantize one attention projection at a time under round-to-nearest (RTN) and, for seven models, GPTQ at 3 and 4 bits, recording reconstruction error, perplexity change, and per-projection activation-weighted quantization error for 3,808 distinct measurements. We find: (1) within a given component type (Q, K, V, or O), reconstruction error explains less than 10% of the variance in perplexity sensitivity in 27 of 36 cases under RTN, with median R^2 = 0.044; (2) both component type and layer identity explain more variance than reconstruction error in all 9 models, with layer identity the strongest predictor in 7 of 9 models and component type strongest in the remaining 2; (3) value (V) projections are the most commonly dominant component, accounting for 38--51% of total positive Delta PPL in seven of nine models; (4) the dominant component is broadly preserved between RTN and GPTQ (5 of 7 cases); and (5) activation-weighted quantization error is a moderately better within-component predictor than reconstruction error for V projections specifically (median R^2 of 0.20 vs. 0.06). These findings indicate that relative weight reconstruction error alone is insufficient for sensitivity-aware bit allocation, and that V projections merit dedicated consideration in mixed-precision schemes.

Multimodal large language models (MLLMs) are increasingly used in real world applications, yet their safety under adversarial conditions remains underexplored. This study evaluates the harmlessness of four leading MLLMs (GPT-4o, Claude Sonnet 3.5, Pixtral 12B, and Qwen VL Plus) when exposed to adversarial prompts across text-only and multimodal formats. A team of 26 red teamers generated 726 prompts targeting three harm categories: illegal activity, disinformation, and unethical behaviour. These prompts were submitted to each model, and 17 annotators rated 2,904 model outputs for harmfulness using a 5-point scale. Results show significant differences in vulnerability across models and modalities. Pixtral 12B exhibited the highest rate of harmful responses (~62%), while Claude Sonnet 3.5 was the most resistant (~10%). Contrary to expectations, text-only prompts were slightly more effective at bypassing safety mechanisms than multimodal ones. Statistical analysis confirmed that both model type and input modality were significant predictors of harmfulness. These findings underscore the urgent need for robust, multimodal safety benchmarks as MLLMs are deployed more widely.

Multimodal Large Language Models have demonstrated impressive capabilities across tasks, yet they often exhibit difficulty in distinguishing task-relevant from irrelevant signals -- particularly in tasks like Visual Question Answering -- which can lead to susceptibility to misleading or spurious inputs. We refer to this broader limitation as the Cross-Modality Competency Problem -- the model's inability to fairly evaluate all modalities. This vulnerability becomes more evident in modality-specific tasks -- such as image classification or pure text question answering -- where models are expected to rely solely on one modality. In such tasks, spurious information from irrelevant modalities often leads to significant performance degradation. We refer to this failure as Modality Interference, which serves as a concrete and measurable instance of the cross-modality competency problem, and we further design a perturbation-based causal diagnostic experiment to verify and quantify this problem. To mitigate modality interference, we propose a novel framework to finetune MLLMs, including perturbation-based data augmentations with both heuristic perturbations and adversarial perturbations, and a consistency regularization strategy applying on model outputs with original and perturbed inputs. Experiments on multiple benchmark datasets (image-heavy, text-heavy and multimodal tasks) and multiple model families with different scales demonstrate significant improvements in robustness and cross-modality competency, indicating our method's effectiveness in boosting unimodal reasoning ability while enhancing performance on multimodal tasks.

Recent studies have shown that higher accuracy on ImageNet usually leads to better robustness against different corruptions. Therefore, in this paper, instead of following the traditional research paradigm that investigates new out-of-distribution corruptions or perturbations deep models may encounter, we conduct model debugging in in-distribution data to explore which object attributes a model may be sensitive to. To achieve this goal, we create a toolkit for object editing with controls of backgrounds, sizes, positions, and directions, and create a rigorous benchmark named ImageNet-E(diting) for evaluating the image classifier robustness in terms of object attributes. With our ImageNet-E, we evaluate the performance of current deep learning models, including both convolutional neural networks and vision transformers. We find that most models are quite sensitive to attribute changes. A small change in the background can lead to an average of 9.23\% drop on top-1 accuracy. We also evaluate some robust models including both adversarially trained models and other robust trained models and find that some models show worse robustness against attribute changes than vanilla models. Based on these findings, we discover ways to enhance attribute robustness with preprocessing, architecture designs, and training strategies. We hope this work can provide some insights to the community and open up a new avenue for research in robust computer vision. The code and dataset are available at https://github.com/alibaba/easyrobust.

We identify a security-fidelity tradeoff in defending LLMs against indirect prompt injection: defenses resist injected instructions largely by suppressing untrusted text, which corrupts tasks that must preserve it, such as translation and document editing. Attack-success metrics cannot see this, because a model that ignores an injection and one that faithfully processes it as data score identically. We introduce SecFid, a benchmark built so that executing an injection, processing it as data, and ignoring it produce distinguishable outputs. This makes fidelity measurable and exposes a frontier: across 1,168 examples and 48 configurations, no model or defense achieves both objectives. The highest-fidelity model reaches 96.5% fidelity at 47.8% security, while the most secure defenses invert this, at 99.3% security but only 71.0%-73.9% fidelity. Even defenses with identical security differ in how they earn it: some repair hijacks into faithful processing, others simply suppress benign content. A decision-theoretic analysis shows why no fixed choice can be right everywhere: the correct behavior is not a property of the defense but of the deployment, set by its relative cost of a hijack versus a dropped span. Security alone therefore measures only half of robustness, and reporting it without fidelity hides the price at which it was bought.

Safety alignment mechanisms in large language models prevent responses to harmful queries through learned refusal behavior, yet these same mechanisms impede legitimate research applications including cognitive modeling, adversarial testing, and security analysis. While abliteration techniques enable surgical removal of refusal representations through directional orthogonalization, the relative effectiveness of available implementations remains uncharacterized. This study evaluates four abliteration tools (Heretic, DECCP, ErisForge, FailSpy) across sixteen instruction-tuned models (7B-14B parameters), reporting tool compatibility on all 16 models and quantitative metrics on subsets dictated by tool support. Single-pass methods demonstrated superior capability preservation on the benchmarked subset (avg GSM8K change across three models: ErisForge -0.28 pp; DECCP -0.13 pp), while Bayesian-optimized abliteration produced variable distribution shift (KL divergence: 0.043-1.646) with model-dependent capability impact. These findings provide researchers with evidence-based selection criteria for abliteration tool deployment across diverse model architectures. The principal finding indicates that mathematical reasoning capabilities exhibit the highest sensitivity to abliteration interventions, with GSM8K change ranging from +1.51 pp to -18.81 pp (-26.5% relative) depending on tool selection and model architecture.

We consider objective evaluation measures of saliency explanations for complex black-box machine learning models. We propose simple robust variants of two notions that have been considered in recent literature: (in)fidelity, and sensitivity. We analyze optimal explanations with respect to both these measures, and while the optimal explanation for sensitivity is a vacuous constant explanation, the optimal explanation for infidelity is a novel combination of two popular explanation methods. By varying the perturbation distribution that defines infidelity, we obtain novel explanations by optimizing infidelity, which we show to out-perform existing explanations in both quantitative and qualitative measurements. Another salient question given these measures is how to modify any given explanation to have better values with respect to these measures. We propose a simple modification based on lowering sensitivity, and moreover show that when done appropriately, we could simultaneously improve both sensitivity as well as fidelity.

As language models (LMs) approach human-level performance, a comprehensive understanding of their behavior becomes crucial. This includes evaluating capabilities, biases, task performance, and alignment with societal values. Extensive initial evaluations, including red teaming and diverse benchmarking, can establish a model's behavioral profile. However, subsequent fine-tuning or deployment modifications may alter these behaviors in unintended ways. We present a method for continual Behavioral Shift Auditing (BSA) in LMs. Building on recent work in hypothesis testing, our auditing test detects behavioral shifts solely through model generations. Our test compares model generations from a baseline model to those of the model under scrutiny and provides theoretical guarantees for change detection while controlling false positives. The test features a configurable tolerance parameter that adjusts sensitivity to behavioral changes for different use cases. We evaluate our approach using two case studies: monitoring changes in (a) toxicity and (b) translation performance. We find that the test is able to detect meaningful changes in behavior distributions using just hundreds of examples.

Background. LLM outputs are highly sensitive to prompt formulation: small wording changes can substantially affect output quality. This matters in software engineering, where prompts guide requirements analysis, code generation, and artefact synthesis. Poor formulations yield unreliable artefacts, yet practitioners lack principled ways to assess a prompt before inference, making selection depend on costly LLM calls and trial-and-error refinement. Aims. We investigate whether measurable linguistic properties of prompts can predict LLM performance before inference, enabling low-cost prompt selection and refinement, validated on binary requirements classification targeting F1, F2, precision, and recall. Method. We generate 9,000 linguistically controlled prompt variants from 100 initial prompts by varying 30 linguistic metrics, evaluated with five open-source LLMs on 625 annotated requirements. Regression predictors are trained via stratified 10-fold cross-validation with permutation-based significance testing; feature importance analysis identifies cross-LLM and model-specific predictors. Results. Linguistic features significantly predict prompt performance across all targets (R2 in [0.38,0.42], q<0.05). Syntactic and morphosyntactic features drive most predictive signal; cross-LLM predictors include compound dependency distribution, conjunction density, and word/sentence length, reflecting sensitivity to domain vocabulary and complex structures. Conclusions. Results suggest practical implications for prompt engineering, including overlap between linguistic patterns that reduce LLM performance and those that increase human comprehension difficulty, and the irrelevance of lexical variety as a quality dimension. More broadly, linguistic profiling combined with standard regression provides an effective, interpretable, low-cost prior before costly optimisation pipelines.

Most studies of prompt injection focus on generative agents, leaving their effects on models with schema-defined outputs unclear. We examine these effects in Jev, a non-generative decision model, using 510 reconstructed InjecAgent cases. Malicious content shifts action probabilities but rarely causes Jev to select the attacker's target. Override markers reduce this influence, while claims of contextual relatedness have small effects. Adaptive attacks using score feedback double the mean highest attacker-target probability found during optimization, while success on fresh validation calls rises from 1.8% to 3.5%. Exploratory analysis links these successes to small initial decision margins or greater attacker control over the observation. Together, these findings show that schema-defined outputs change but do not eliminate prompt-injection risk, highlighting the need to evaluate how untrusted content influences choices within the allowed action set.

Frontier language models sometimes recognize that they are being evaluated and adjust their behavior, undermining validity of benchmark results. Yet the field studies it without a shared foundation, conflating properties of the evaluation with properties of the model, and detection with behavioral response. We ground evaluation awareness in social psychology, decomposing it into an environment component (how recognizable the task is) and a model component that separates recognition from propensity to act on it. We operationalize the environment component through eight categorized trigger factors, such as placeholder entities and grading-style output formats, and study recognition and behavior through chain-of-thought monitoring. Across nine frontier models and four benchmarks, recognition rates depend on the specific pairing of model and benchmark rather than on either in isolation. Recognition rarely leads to behavioral change, and when it does, the direction depends on the type of evaluation perceived. Models are also more sensitive to safety than capability evaluations, placing safety benchmark validity at greater risk. To study which factors each model is sensitive to and how they interact, we propose EvalAwareBench, a factor-controlled benchmark of 100 paired safety-capability tasks where each of the eight factors can be independently toggled, varying evaluative signals while holding the underlying request fixed. Through EvalAwareBench, we find that no single factor uniformly affects all models, but stacking factors progressively raises evaluation awareness across all of them. Our framework and EvalAwareBench provide the tools to measure, attribute, and mitigate evaluation awareness, pointing to behavioral consistency under recognition as a promising path forward.

Many modern software projects evolve rapidly to incorporate new features and security patches. It is important for users to update their dependencies to safer versions, but many still use older, vulnerable package versions because upgrading can be difficult and may break their existing codebase. Software developers can mitigate this problem by backporting security patches to older releases. However, manually backporting is time-consuming and error-prone. The effectiveness of existing automated backporting techniques on general software remains unclear since they typically target only code-hunk or function-level patch porting scenarios and are evaluated with imperfect metrics. To facilitate the development and evaluation of automated backporting techniques, we introduce BackportBench, the first comprehensive benchmark suite for patch backporting problem. BackportBench is a multilingual benchmark that contains 202 patch backporting problems from PyPI, Maven, and npm, each with executable Docker environments and relevant test cases. We evaluated existing patch porting methods and LLM-based techniques that have the potential to adapt to this task using BackportBench. The results show that the agentic method has outperformed traditional patch porting methods, especially on cases that require logical and structural changes. However, the performance varies across different programming languages. Based on the findings, we draw several implications for researchers and software practitioners in future work on automated backporting.

The advent of instruction-tuned Large Language Models designed for coding tasks (Code LLMs) has transformed software engineering practices. However, their robustness against various input challenges remains a critical concern. This study introduces DegradePrompter, a novel method designed to systematically evaluate the robustness of instruction-tuned Code LLMs. We assess the impact of diverse input challenges on the functionality and correctness of generated code using rigorous metrics and established benchmarks. Our comprehensive evaluation includes five state-of-the-art open-source models and three production-grade closed-source models, revealing varying degrees of robustness. Open-source models demonstrate an increased susceptibility to input perturbations, resulting in declines in functional correctness ranging from 12% to 34%. In contrast, commercial models demonstrate relatively greater resilience, with performance degradation ranging from 3% to 24%. To enhance the robustness of the models against these vulnerabilities, we investigate a straightforward yet effective mitigation strategy. Our findings highlight the need for robust defense mechanisms and comprehensive evaluations during both the development and deployment phases to ensure the resilience and reliability of automated code generation systems.

LLM-based multi-agent pipelines flip from correct to incorrect answers under simulated peer disagreement at rates we term yield, a vulnerability widely attributed to RLHF-induced sycophancy. We test this attribution across four model families and find it largely wrong: pretrained base models exhibit the same substitution pattern as their Instruct variants, averaging higher yield than Instruct. Using activation patching, we localize the corruption to a narrow mid-layer window where attention carries the causal weight and MLP contribution is negligible; patching above this window restores 96% of the clean-to-pressured P(correct) gap. The attack surface decomposes into two independent factors (channel framing and consensus strength) whose interaction produces a 47.5 percentage-point yield gap at majority consensus, preserved across jury sizes N in {4, 5, 6}. Two converging activation-space interventions show that pressure suppresses clean-reasoning features rather than activating a new sycophancy circuit. A single correctly-arguing dissenter reduces yield by 54-73 percentage points across all framings tested, whereas the strongest prompt-level defense fails on attack variants outside its design surface. Mitigations should target the mechanism, structured dissent at the pipeline level, rather than prompt-level defenses.

To ensure AI safety, instruction-tuned Large Language Models (LLMs) are specifically trained to ensure alignment, which refers to making models behave in accordance with human intentions. While these models have demonstrated commendable results on various safety benchmarks, the vulnerability of their safety alignment has not been extensively studied. This is particularly troubling given the potential harm that LLMs can inflict. Existing attack methods on LLMs often rely on poisoned training data or the injection of malicious prompts. These approaches compromise the stealthiness and generalizability of the attacks, making them susceptible to detection. Additionally, these models often demand substantial computational resources for implementation, making them less practical for real-world applications. Inspired by recent success in modifying model behavior through steering vectors without the need for optimization, and drawing on its effectiveness in red-teaming LLMs, we conducted experiments employing activation steering to target four key aspects of LLMs: truthfulness, toxicity, bias, and harmfulness - across a varied set of attack settings. To establish a universal attack strategy applicable to diverse target alignments without depending on manual analysis, we automatically select the intervention layer based on contrastive layer search. Our experiment results show that activation attacks are highly effective and add little or no overhead to attack efficiency. Additionally, we discuss potential countermeasures against such activation attacks. Our code and data are available at https://github.com/wang2226/Backdoor-Activation-Attack Warning: this paper contains content that can be offensive or upsetting.

Despite their remarkable achievements and widespread adoption, Multimodal Large Language Models (MLLMs) have revealed significant security vulnerabilities, highlighting the urgent need for robust safety evaluation benchmarks. Existing MLLM safety benchmarks, however, fall short in terms of data quality and coverge, and modal risk combinations, resulting in inflated and contradictory evaluation results, which hinders the discovery and governance of security concerns. Besides, we argue that vulnerabilities to harmful queries and oversensitivity to harmless ones should be considered simultaneously in MLLMs safety evaluation, whereas these were previously considered separately. In this paper, to address these shortcomings, we introduce Unified Safety Benchmarks (USB), which is one of the most comprehensive evaluation benchmarks in MLLM safety. Our benchmark features high-quality queries, extensive risk categories, comprehensive modal combinations, and encompasses both vulnerability and oversensitivity evaluations. From the perspective of two key dimensions: risk categories and modality combinations, we demonstrate that the available benchmarks -- even the union of the vast majority of them -- are far from being truly comprehensive. To bridge this gap, we design a sophisticated data synthesis pipeline that generates extensive, high-quality complementary data addressing previously unexplored aspects. By combining open-source datasets with our synthetic data, our benchmark provides 4 distinct modality combinations for each of the 61 risk sub-categories, covering both English and Chinese across both vulnerability and oversensitivity dimensions.

Instruction finetuning is standard practice for improving LLM performance, yet it remains unclear whether it enhances reasoning or merely induces surface-level pattern matching. We investigate this by evaluating base and instruction-tuned models on standard math benchmarks, structurally perturbed variants, and domain-shifted tasks. Our analysis highlights two key (often overlooked) limitations of instruction tuning. First, the performance advantage is unstable and depends heavily on evaluation settings. In zero-shot CoT settings on GSM8K, base models consistently outperform instruction-tuned variants, with drops as high as 32.67\% (Llama3-70B). Instruction-tuned models only match or exceed this performance when provided with few-shot exemplars, suggesting a reliance on specific prompting patterns rather than intrinsic reasoning. Second, tuning gains are brittle under distribution shift. Our results show that base models surpass instruction-tuned variants on the domain-specific MedCalc benchmark. Additionally, instruction-tuned models show sharp declines on perturbed datasets, indicating sensitivity to prompt structure over robust reasoning.

Deep learning (DL) models have become increasingly popular in identifying software vulnerabilities. Prior studies found that vulnerabilities across different vulnerable programs may exhibit similar vulnerable scopes, implicitly forming discernible vulnerability patterns that can be learned by DL models through supervised training. However, vulnerable scopes still manifest in various spatial locations and formats within a program, posing challenges for models to accurately identify vulnerable statements. Despite this challenge, state-of-the-art vulnerability detection approaches fail to exploit the vulnerability patterns that arise in vulnerable programs. To take full advantage of vulnerability patterns and unleash the ability of DL models, we propose a novel vulnerability-matching approach in this paper, drawing inspiration from program analysis tools that locate vulnerabilities based on pre-defined patterns. Specifically, a vulnerability codebook is learned, which consists of quantized vectors representing various vulnerability patterns. During inference, the codebook is iterated to match all learned patterns and predict the presence of potential vulnerabilities within a given program. Our approach was extensively evaluated on a real-world dataset comprising more than 188,000 C/C++ functions. The evaluation results show that our approach achieves an F1-score of 94% (6% higher than the previous best) and 82% (19% higher than the previous best) for function and statement-level vulnerability identification, respectively. These substantial enhancements highlight the effectiveness of our approach to identifying vulnerabilities. The training code and pre-trained models are available at https://github.com/optimatch/optimatch.

Enterprise agents must follow long-horizon, conditional, safety-critical standard operating procedures (SOPs). We compile machine-readable SOP constraints into executable pseudo-code and run them with a program-guided (PG) stack machine that pages the active frame while an LLM performs semantic execution. A three-arm SOPBench study across six models separates representation from runtime: compiled text never significantly hurts and gains up to 16.0 points where official prose underperforms. Runtime guidance is capability-gated. Two strong models independently show positive seven-domain PG contrasts (58:19 and 75:31 discordant pairs), whereas weak models are harmed. A full-program cursor ablation (active frame first, complete program retained) recovers much of the strong-model refusal gain; selective visibility adds a smaller improvement. Paired probe and audit measurements track this divide to spontaneous state discipline rather than reconstruction ability. On Bank the three primary arms rise from 70.4 to 86.4 to 92.8, with 100% refusal correctness. Practical guidance: compile first; enable active-frame paging only after a model-level discipline check.

Exploitation is not a binary event. It is a ladder of acquiring progressive capabilities, from executing a single buggy line of code to taking full control of the target. However, existing LLM security benchmarks treat a crash as exploitation success. That single binary outcome collapses the hard parts of exploitation: the transition from triggering a bug to constructing reusable primitives and control. We present ExploitBench, a capability-graded benchmark that decomposes exploitation into 16 measurable flags, from coverage and crash through sandbox primitives, arbitrary read/write, control-flow hijack, and arbitrary code execution. Each capability is verified by a deterministic oracle that uses a per-run randomized challenge-response for primitives, differential execution against ground-truth binaries to measure progress, and a signal-handler proof for code execution. We instantiate ExploitBench on 41 V8 bugs because V8 is both widely deployed and exploitation-hardened. We report three arms: <model,env> as the primary measurement of model-environment capability, <model,env, adaptive coaching> as a secondary arm that adds adaptive coaching to test whether targeted feedback shifts outcomes, and <model,env,harness> as an ablation that swaps in the model's native CLI to check whether vendor-side optimizations increase exploitation capabilities. Our results show a sharp capability split between publicly deployed frontier models and the private frontier. Across the 8 publicly deployed models tested, reaching the vulnerable code and triggering a crash is routine, but arbitrary code execution is not. The private model shows arbitrary code execution on approximately half. Overall, results suggest that exploit construction against hardened targets is an emerging frontier capability.

We evaluate the robustness of several large language models on multiple datasets. Robustness here refers to the relative insensitivity of the model's answers to meaning-preserving variants of their input. Benchmark datasets are constructed by introducing naturally-occurring, non-malicious perturbations, or by generating semantically equivalent paraphrases of input questions or statements. We further propose a novel metric for assessing a model robustness, and demonstrate its benefits in the non-adversarial scenario by empirical evaluation of several models on the created datasets.

The deployment of large language models (LLMs) raises significant ethical and safety concerns. While LLM alignment techniques are adopted to improve model safety and trustworthiness, adversaries can exploit these techniques to undermine safety for malicious purposes, resulting in misalignment. Misaligned LLMs may be published on open platforms to magnify harm. To address this, additional safety alignment, referred to as realignment, is necessary before deploying untrusted third-party LLMs. This study explores the efficacy of fine-tuning methods in terms of misalignment, realignment, and the effects of their interplay. By evaluating four Supervised Fine-Tuning (SFT) and two Preference Fine-Tuning (PFT) methods across four popular safety-aligned LLMs, we reveal a mechanism asymmetry between attack and defense. While Odds Ratio Preference Optimization (ORPO) is most effective for misalignment, Direct Preference Optimization (DPO) excels in realignment, albeit at the expense of model utility. Additionally, we identify model-specific resistance, residual effects of multi-round adversarial dynamics, and other noteworthy findings. These findings highlight the need for robust safeguards and customized safety alignment strategies to mitigate potential risks in the deployment of LLMs. Our code is available at https://github.com/zhangrui4041/The-Art-of-Mis-alignment.

We show that LoRA adapters, the dominant distribution format for fine-tuned LLMs, can be reliably backdoored through training data poisoning while preserving baseline task performance. On a Qwen 2.5 1.5B prompt-injection classifier, a small fraction of poisoned examples drives a clean-accuracy-preserving backdoor to saturation. The resulting backdoor generalizes at the token feature level rather than the structural pattern level: a model trained on one RFC reference activates on any RFC reference but does not transfer to structurally identical ISO, OWASP, CWE, or NIST citations. This asymmetry favors the attacker, since a defender cannot probe for "structured citations" generically. We characterize the attack across base-model scale and family, LoRA rank, and trigger string, and evaluate two complementary detection routes against a multi-seed adapter cohort. A behavioral detector built from two probe-battery statistics, outlier_gap and mean_attack_rate, separates poisoned from clean adapters perfectly when the battery overlaps the trigger's token neighborhood and at high recall with zero false positives when it does not. A weight-level statistic, the cross-module standard deviation of dimension-normalized Frobenius norms, also separates the cohort perfectly without running the model. Combined, the two routes are robust to probe composition. Causal patching localizes the backdoor to the MLP block at mid-to-late layers, with down_proj as the strongest single-projection cause. Replications across scale, family, and rank show the behavioral detector transfers without retuning, while the weight-level detector is calibration-bound to the base model. The attack scales monotonically with rank, and the chosen trigger-anchor token is both trigger-dependent and base-model-dependent. Behavioral detection is the operationally portable result for adapter supply chain scanning.

Current language model evaluations measure what models know under ideal conditions but not how robustly they know it under realistic stress. Static benchmarks like MMLU and TruthfulQA cannot distinguish a model that lacks knowledge from one whose verification mechanisms collapse when information degrades or adversaries probe for weaknesses. We introduce the Drill-Down and Fabricate Test (DDFT), a protocol that measures epistemic robustness: a model's ability to maintain factual accuracy under progressive semantic compression and adversarial fabrication. We propose a two-system cognitive model comprising a Semantic System that generates fluent text and an Epistemic Verifier that validates factual accuracy. Our findings, based on evaluating 9 frontier models across 8 knowledge domains at 5 compression levels (1,800 turn-level evaluations), reveal that epistemic robustness is orthogonal to conventional design paradigms. Neither parameter count (r=0.083, p=0.832) nor architectural type (r=0.153, p=0.695) significantly predicts robustness, suggesting it emerges from training methodology and verification mechanisms distinct from current approaches. Error detection capability strongly predicts overall robustness (rho=-0.817, p=0.007), indicating this is the critical bottleneck. We find that flagship models exhibit brittleness despite their scale, while smaller models can achieve robust performance, challenging assumptions about the relationship between model size and reliability. The DDFT framework provides both theoretical foundation and practical tools for assessing epistemic robustness before deployment in critical applications.

Attribution methods can provide powerful insights into the reasons for a classifier's decision. We argue that a key desideratum of an explanation method is its robustness to input hyperparameters which are often randomly set or empirically tuned. High sensitivity to arbitrary hyperparameter choices does not only impede reproducibility but also questions the correctness of an explanation and impairs the trust of end-users. In this paper, we provide a thorough empirical study on the sensitivity of existing attribution methods. We found an alarming trend that many methods are highly sensitive to changes in their common hyperparameters e.g. even changing a random seed can yield a different explanation! Interestingly, such sensitivity is not reflected in the average explanation accuracy scores over the dataset as commonly reported in the literature. In addition, explanations generated for robust classifiers (i.e. which are trained to be invariant to pixel-wise perturbations) are surprisingly more robust than those generated for regular classifiers.

Toxic interactions during code reviews can undermine teamwork and hinder productivity in software engineering (SE) teams. While prior studies explore toxicity detection and empirical investigation, they lack real-time detoxification tools to support the SE community. To address this gap, we present ToxiShield, a browser extension for GitHub pull requests that is built using three modules: i) Toxicity Filter -- to identify whether a text is toxic, ii) Communication coach -- to facilitate just-in-time fine-grained toxicity categorization with explanations, and iii) The Reframer -- that generates a revised, constructive alternative of a toxic text. For each module, we trained and evaluated multiple deep learning and Large Language Models (LLMs) to identify the best choice. A BERT-based binary detection model, trained on 38,761 code review samples, achieves 98% accuracy and an F1-score of 97% and is the selected one for the Toxicity Filter module. For the Communication Coach, prompt-tuned Claude 3.5 Sonnet achieved the best performance with 39% MCC and 42% F1 in multiclass toxicity classification with detailed reasoning. For Reframer, we evaluated five LLMs using a fine-tuning strategy on a dataset of 10,120 code review comments. The fine-tuned Llama 3.2 model achieves 95.27% style transfer accuracy, 97.03% fluency, 67.07% content preservation, and an 84% J-score. We further validated ToxiShield through a human evaluation using the Technology Acceptance Model with 10 participants, confirming its perceived usefulness and ease of adoption. ToxiShield sets a benchmark for advancing constructive communication in software engineering, driving inclusivity and healthier collaboration in open-source communities.

Malicious Python packages make software supply chains vulnerable by exploiting trust in open-source repositories like Python Package Index (PyPI). Lack of real-time behavioral monitoring makes metadata inspection and static code analysis inadequate against advanced attack strategies such as typosquatting, covert remote access activation, and dynamic payload generation. To address these challenges, we introduce DySec, a machine learning (ML)-based dynamic analysis framework for PyPI that uses eBPF kernel and user-level probes to monitor behaviors during package installation. By capturing 36 real-time features-including system calls, network traffic, resource usage, directory access, and installation patterns-DySec detects threats like typosquatting, covert remote access activation, dynamic payload generation, and multiphase attack malware. We developed a comprehensive dataset of 14,271 Python packages, including 7,127 malicious sample traces, by executing them in a controlled isolated environment. Experimental results demonstrate that DySec achieves a 95.99\% detection accuracy with a latency of <0.5s, reducing false negatives by 78.65\% compared to static analysis and 82.24\% compared to metadata analysis. During the evaluation, DySec flagged 11 packages that PyPI classified as benign. A manual analysis, including installation behavior inspection, confirmed six of them as malicious. These findings were reported to PyPI maintainers, resulting in the removal of four packages. DySec bridges the gap between reactive traditional methods and proactive, scalable threat mitigation in open-source ecosystems by uniquely detecting malicious install-time behaviors.

Vision-language models (VLMs) are fragile under image corruption. We find that the wording of the question affects VLMs in two opposite ways. Verbose questions make VLMs substantially more robust---e.g., rephrasing "Is there a cat?" into "Please look carefully and answer: is there a cat?". Conversely, VLMs become more fragile under corruption when the question is semantically complex or finer-grained, e.g., "what colour is the cup left of the chair?" instead of "is there a cup?". Both effects stem from question-conditioned cross-modal attention, which induces a spectral filter over image patches: verbose questions broaden its frequency support, while fine-grained questions concentrate it onto fewer visual scales. The model's answer drifts most when this filter and the corruption sit on the same spatial frequencies. We test the filter view on Qwen3-VL and LLaVA-OneVision across GQA and CLEVR; verbose paraphrasing reduces drift variance by 70--81% on the 8B models. The practical recipe---pad the prompt---further yields measurable gains in accuracy, even under image corruption.

We show that even the most recent safety-aligned LLMs are not robust to simple adaptive jailbreaking attacks. First, we demonstrate how to successfully leverage access to logprobs for jailbreaking: we initially design an adversarial prompt template (sometimes adapted to the target LLM), and then we apply random search on a suffix to maximize the target logprob (e.g., of the token "Sure"), potentially with multiple restarts. In this way, we achieve nearly 100\% attack success rate -- according to GPT-4 as a judge -- on GPT-3.5/4, Llama-2-Chat-7B/13B/70B, Gemma-7B, and R2D2 from HarmBench that was adversarially trained against the GCG attack. We also show how to jailbreak all Claude models -- that do not expose logprobs -- via either a transfer or prefilling attack with 100\% success rate. In addition, we show how to use random search on a restricted set of tokens for finding trojan strings in poisoned models -- a task that shares many similarities with jailbreaking -- which is the algorithm that brought us the first place in the SaTML'24 Trojan Detection Competition. The common theme behind these attacks is that adaptivity is crucial: different models are vulnerable to different prompting templates (e.g., R2D2 is very sensitive to in-context learning prompts), some models have unique vulnerabilities based on their APIs (e.g., prefilling for Claude), and in some settings it is crucial to restrict the token search space based on prior knowledge (e.g., for trojan detection). We provide the code, prompts, and logs of the attacks at https://github.com/tml-epfl/llm-adaptive-attacks.

Clinical decision-support systems are expert systems whose recommendations clinicians act on directly, yet they are usually cleared on one aggregate accuracy number from a held-out test set. That number says nothing about input reliability under encoding shifts, subgroup gaps, threshold sensitivity, or operational feasibility. We present RISED, a pre-deployment evaluation framework operationalising five dimensions (Reliability, Inclusivity, Sensitivity, Equity, Deployability) through BCa bootstrap 95% confidence intervals, literature-grounded thresholds, and Holm-Bonferroni-corrected PASS / FAIL / INCONCLUSIVE verdicts; Equity is a proxy-dependence diagnostic rather than a gating test. Applied to seven cohorts spanning 35 years (n from 303 to 99,492), RISED surfaces failures invisible to AUROC: on Diabetes 130, Reliability passes by three orders of magnitude (PSS = 0.0004) while Inclusivity (AUC parity gap = 0.262) and Sensitivity (max threshold-flip rate 49.1%) fail decisively; both NHIS cohorts reproduce this. NHANES 2021-2023, with a complete feature profile, achieves INCONCLUSIVE verdicts; BRFSS 2024 produces the suite's most severe Sensitivity failure (max threshold-flip rate 64.2%) after instrument rotation removed hypertension and cholesterol. The pattern recurs on credit- and income-prediction cohorts, confirming domain-agnosticity; a multi-model check shows the failures are data-driven, not model-specific. RISED ships as an open-source Python package complementing TRIPOD+AI, FUTURE-AI, and Fairlearn with the structured numerical evidence those standards require but do not prescribe.

Recent research has adopted a new experimental field centered around the concept of text perturbations which has revealed that shuffled word order has little to no impact on the downstream performance of Transformer-based language models across many NLP tasks. These findings contradict the common understanding of how the models encode hierarchical and structural information and even question if the word order is modeled with position embeddings. To this end, this paper proposes nine probing datasets organized by the type of controllable text perturbation for three Indo-European languages with a varying degree of word order flexibility: English, Swedish and Russian. Based on the probing analysis of the M-BERT and M-BART models, we report that the syntactic sensitivity depends on the language and model pre-training objectives. We also find that the sensitivity grows across layers together with the increase of the perturbation granularity. Last but not least, we show that the models barely use the positional information to induce syntactic trees from their intermediate self-attention and contextualized representations.

Offline optimization is an important task in numerous material engineering domains where online experimentation to collect data is too expensive and needs to be replaced by an in silico maximization of a surrogate of the black-box function. Although such a surrogate can be learned from offline data, its prediction might not be reliable outside the offline data regime, which happens when the surrogate has narrow prediction margin and is (therefore) sensitive to small perturbations of its parameterization. This raises the following questions: (1) how to regulate the sensitivity of a surrogate model; and (2) whether conditioning an offline optimizer with such less sensitive surrogate will lead to better optimization performance. To address these questions, we develop an optimizable sensitivity measurement for the surrogate model, which then inspires a sensitivity-informed regularizer that is applicable to a wide range of offline optimizers. This development is both orthogonal and synergistic to prior research on offline optimization, which is demonstrated in our extensive experiment benchmark.

Software vulnerabilities are increasing at an alarming rate. However, manual patching is both time-consuming and resource-intensive, while existing automated vulnerability repair (AVR) techniques remain limited in effectiveness. Recent advances in large language models (LLMs) have opened a new paradigm for AVR, demonstrating remarkable progress. To examine the capability of LLMs in AVR, several vulnerability benchmarks have been proposed recently. However, they still suffer from key limitations of outdated vulnerabilities, limited language coverage, unreliable patch validation, and insufficient reproducibility. To overcome these challenges, we introduce PATCHEVAL, a multilingual benchmark for Go, JavaScript, and Python, languages for which existing benchmarks remain unexplored. PATCHEVAL curates a dataset of 1,000 vulnerabilities drawn from CVEs reported between 2015 and 2025, covering 65 distinct CWEs. A subset of 230 CVEs is further equipped with runtime sandbox environments, enabling patch verification through both security tests and functionality tests. To provide a systematic comparison of LLM-based vulnerability repair, we evaluate a series of state-of-the-art LLMs and agents, presenting an in-depth analysis that empirically yields key insights to guide future research in AVR.

Large language models (LLMs) are increasingly characterised in recent evaluation work as having stable, model-level preference and value systems. However, accompanying robustness checks are limited to incidental prompt perturbations such as syntax variation and option reordering. This leaves open whether the measured properties survive when the surrounding task context changes, as it does in most real deployments. We test this directly across two established pairwise paradigms: ranking country preferences and eliciting utility judgements. In both, we make the deployment context -- the high-level task the model is performing while making concrete value-dependent choices -- our controlled variable, varied across framings such as writing a Reddit post or a news article. Across five LLMs and over 1.2M pairwise decisions, deployment context produces variation far larger than prompt paraphrasing and temperature controls. In country preference rankings over 15 countries, context induces widespread, statistically significant rank shifts; the aggregate Global North favouritism reported in prior work is itself context-dependent, with each model's bias shifting systematically across contexts. In utility elicitation over 50 outcomes, broad cross-category ordering is preserved, but fine-grained rankings within domains vary substantially, and cardinal exchange rates between outcomes (e.g. how many lives in one region equal one in another) shift by a factor of 2.47 at the median. Reported model-level preferences and utilities are therefore better understood as context-conditioned measurements than fixed model-level properties: safety guarantees obtained under one framing provide limited assurance in another.

Large language models can diagnose a student program from its code, problem statement, and reference solution. Evaluating this ability requires a clear definition of what counts as the correct diagnosis. We introduce PyMETA, a Python error dataset with 48,646 student submissions to 155 problems. Every submission has a single label for the first execution error identified by an Online Judge, or No Error when the program passes all tests. A targeted subset of 97 submissions also has expert labels collected through iterative repair and re-execution. The taxonomy has three levels; its most detailed level contains 14 labels, including No Error, Logic Error, named Python exceptions, and an Other Errors category. We evaluate two finetuned models and two groups of prompted LLMs: four earlier models and four recent models. When evaluated against the first execution error, the recent prompted models reach 87.5--93.8% macro F1, above the strongest finetuned baseline at 80.6%. This is the opposite of the comparison obtained with the earlier prompted models. On the 97-item expert subset, however, exact-set match is only 43.3--48.5%, although sample F1 is about 79--81%. Output format also matters. On the same 45 audited submissions whose expert label sets do not contain Logic Error, none of the four recent models returns that label under single-error prompting, but 46.7--57.8% of their multi-error outputs include it, usually after an explicit-error label. The results show that model rankings and claims about label bias depend on the meaning of the gold label, the number of labels a model may return, and the scoring rule.

The study of adversarial robustness has so far largely focused on perturbations bound in p-norms. However, state-of-the-art models turn out to be also vulnerable to other, more natural classes of perturbations such as translations and rotations. In this work, we thoroughly investigate the vulnerability of neural network--based classifiers to rotations and translations. While data augmentation offers relatively small robustness, we use ideas from robust optimization and test-time input aggregation to significantly improve robustness. Finally we find that, in contrast to the p-norm case, first-order methods cannot reliably find worst-case perturbations. This highlights spatial robustness as a fundamentally different setting requiring additional study. Code available at https://github.com/MadryLab/adversarial_spatial and https://github.com/MadryLab/spatial-pytorch.

PGD adversarial training, the standard robustness method, can reduce Jacobian Frobenius norm yet worsen clean-input geometry (e.g., TDI 1.336 vs. ERM 1.093). We show this is not an implementation artifact but a theorem-level consequence of supervised learning. We prove that any encoder minimizing supervised loss must retain non-zero sensitivity along directions correlated with training labels, including directions that are nuisance at test time. This holds across proper scoring rules, architectures, and dataset sizes. We call this the geometric blind spot of supervised learning. This theorem unifies four empirical phenomena often treated separately: non-robust features, texture bias, corruption fragility, and the robustness-accuracy tradeoff. It also explains why suppressing sensitivity in one adversarial direction can redistribute sensitivity elsewhere. We introduce Trajectory Deviation Index (TDI), a diagnostic of geometric isotropy. Unlike CKA, intrinsic dimension, or Jacobian Frobenius norm alone, TDI captures the failure mode above. In our experiments, PGD attains low Frobenius norm but high TDI, while PMH attains the lowest TDI with one additional training term and no architectural changes. Across seven tasks, BERT/SST-2, and ImageNet ViT-B/16 (backbone family underlying CLIP/DINO/SAM), the blind spot is measurable and repairable. It appears at foundation-model scale, worsens with model scale and task-specific fine-tuning, and is substantially reduced by PMH. PMH also leads on non-Gaussian corruption types (blur/brightness/contrast) without corruption-specific training.